Saliva Ejectors

Dental Saliva Ejectors & Surgical Aspirator Tips — Disposable Low-Volume Suction & Metal HVE Tips for Chair-Side Evacuation

Dental saliva ejectors are the small-bore disposable plastic suction tubes that hang into the patient's mouth and continuously remove saliva and water spray during routine restorative, prophylactic and orthodontic procedures — typically used by the patient on their own lower lip while the operator works. They pair with high-volume evacuation (HVE) tips and surgical aspirator tips for higher-flow suction during airotor cavity preparation, surgical extraction, implant osteotomy and apicectomy. Dentalkart stocks single-use plastic saliva ejectors, autoclavable metal HVE and surgical aspirator tips and surgical aspirators from Waldent, Eiti, Cotisen, Oro, Oracraft, GDC and ET.

Types of Saliva Ejector & Aspirator Tip Stocked

Single-use plastic saliva ejectors (low-volume suction)

Disposable single-patient plastic saliva ejectors with an internal copper wire (or wire-free) for bending to fit the patient's mouth — connects to the dental chair's low-volume suction line. Used for routine continuous saliva and water-spray removal during examination, scaling, restorative and prophylactic work. For example, Waldent Saliva Ejector with Copper Wire (Pack of 100), ET Saliva Ejector, Saliva Ejector with Removable Tip Premium Quality (100 pcs) and the Indian Saliva Ejector.

High-volume evacuation (HVE) tips — vented oral evacuation

Higher-bore HVE evacuation tips that connect to the dental chair's high-volume suction line — used during airotor cavity preparation, ultrasonic scaling, air polishing and any aerosol-generating procedure where rapid water-spray clearance is required. For example, Eiti High-Volume Evacuation Tips (Pack of 1) and Oro Vented Oral Evacuation Tips 6".

Metal autoclavable surgical aspirator tips

Reusable autoclavable stainless-steel surgical aspirator tips in narrow profiles (3.0 mm and 5.0 mm Coupland diameters and the Frazier surgical curve) for precision aspiration of blood, irrigation fluid and bone debris during surgical extraction, implant osteotomy, apicectomy and periodontal flap surgery. For example, GDC Metal Suction Tip 3.0 mm, GDC Metal Suction Coupland Tip 5.0 mm, Oracraft Metal Suction Tips and Oracraft Frazier Suction Tip.

Surgical aspirators (extended-length suction tubes)

Surgical-length aspirator tubes (18–19 cm) for posterior surgical access, apicectomy and third-molar extraction. For example, Waldent Surgical Aspirator 19 cm, Waldent Suction Tube Curved 18 cm and Cotisen Surgical Aspirator Tips.

When Saliva Ejectors & Aspirator Tips Are Used

• Continuous low-volume saliva removal during routine examination, scaling and prophylaxis (single-use plastic saliva ejector)
• High-volume water-spray and aerosol evacuation during airotor cavity preparation (HVE tip)
• Aerosol evacuation during ultrasonic scaling and air polishing (HVE tip)
• Suction of root-canal irrigation (sodium hypochlorite, EDTA, saline) during endodontic treatment
• Precision aspiration during surgical extraction, apicectomy and periodontal surgery (metal surgical aspirator tip)
• Implant osteotomy bone debris and saline irrigation evacuation (metal Frazier tip)
• Third-molar surgery and impacted-tooth sectioning posterior access (surgical-length 18–19 cm aspirator)
• Paediatric chair-side saliva control during composite restorations

How to Choose the Right Saliva Ejector or Aspirator Tip

1. For routine continuous saliva control during examination and prophylaxis pick a single-use plastic saliva ejector with copper wire (Waldent Saliva Ejector with Copper Wire Pack of 100) — bendable to fit the patient's mouth.
2. For airotor cavity preparation and aerosol-generating procedures use a high-volume evacuation tip (Eiti HVE Tips, Oro Vented Oral Evacuation 6") on the chair's HVE line.
3. For surgical procedures (extraction, implant, apicectomy, perio flap) use a reusable autoclavable metal surgical aspirator tip — GDC 3.0 mm for fine precision or 5.0 mm Coupland for higher-volume blood/irrigation evacuation.
4. For posterior third-molar surgery and apicectomy use the extended 18–19 cm Waldent Surgical Aspirator for the necessary reach.
5. Always autoclave reusable metal surgical aspirator tips between every patient per the manufacturer IFU; discard single-use plastic saliva ejectors and HVE tips after every patient — never reuse disposables.
6. Pair the saliva ejector and HVE tip workflow with the clinic's matched dental suction unit — under-sized suction defeats even premium tips.

Saliva Ejector & Aspirator Brands at Dentalkart

Dentalkart's saliva ejector and aspirator tip range covers Waldent (Saliva Ejector with Copper Wire Pack of 100, Surgical Aspirator 19 cm, Suction Tube Curved 18 cm), Eiti (High-Volume Evacuation Tips), Cotisen (Surgical Aspirator Tips), Oro (Vented Oral Evacuation Tips 6 inch), Oracraft (Metal Suction Tips, Frazier Suction Tip), GDC (Metal Suction Tip 3.0 mm, Metal Suction Coupland Tip 5.0 mm), ET (Saliva Ejector) and generic single-use packs — covering disposable plastic saliva ejectors, high-volume evacuation tips, metal autoclavable surgical aspirator tips and surgical-length aspirators.

Why Buy Saliva Ejectors from Dentalkart

Every saliva ejector pack, HVE tip and surgical aspirator is sourced direct from the manufacturer or authorised Indian distributor, ships sealed in original primary packaging with batch and expiry on every pack, and reaches 110000+ pincodes across India with COD on most disposable SKUs. Pair saliva ejectors with the full dental disposables range from one trusted catalogue serving 50,000+ dentists.

What are dental saliva ejectors used for?

Dental saliva ejectors are used to continuously remove saliva and water spray from the patient's mouth during every chair-side procedure — examination, scaling, prophylaxis, composite restoration and orthodontic work. They connect to the dental chair's low-volume suction line and the patient typically holds the tip on their own lower lip while the operator works.

What is the difference between a saliva ejector and an HVE tip?

The difference is bore size and suction flow. Saliva ejectors are small-bore disposable plastic tubes for continuous low-volume saliva removal during routine work. HVE (high-volume evacuation) tips are higher-bore tips that connect to the chair's high-volume suction line — used during airotor cavity preparation, ultrasonic scaling and aerosol-generating procedures for rapid water-spray clearance.

When do I need a metal surgical aspirator tip instead of a plastic saliva ejector?

You need a metal surgical aspirator tip (GDC 3.0 mm or 5.0 mm Coupland, Frazier curved) instead of a plastic saliva ejector for surgical procedures — extraction of impacted teeth, implant osteotomy, apicectomy, periodontal flap surgery and bone-graft procedures. Metal tips provide precision suction in narrow surgical spaces and are autoclavable for sterile-field reuse.

Can metal surgical aspirator tips be reused?

Yes — metal surgical aspirator tips (GDC, Oracraft) are reusable when autoclaved between every patient per the manufacturer IFU. Plastic saliva ejectors and HVE tips are single-use disposables — never reuse them on another patient, even with disinfection wipe-down, because the internal lumen cannot be reliably decontaminated.

Are the saliva ejectors on Dentalkart genuine and CDSCO-compliant?

Yes, every saliva ejector pack, HVE tip and metal surgical aspirator on Dentalkart is genuine and CDSCO-compliant. All Waldent, Eiti, Cotisen, Oro, Oracraft, GDC, ET and generic units ship sealed in original primary packaging with batch number and expiry printed on every pack from authorised Indian distribution.