Coltene Diatech Crown Preparation Kit

Coltene Diatech Crown Preparation Kit

Coltene-whaledent

Availability: In stock

Crown Preparation Kit
New Rs. 3655

Rs.4,650.00

Rs.3,655.00





OR
Description

Details

An excellent marginal fit is key to restoration longevity and success. Excellent fit requires good marginal preparation. Restorations fail at the margins more than anywhere else, leading to adhesive failure of the bond or cement wash-out, leakage and pulp symptoms. This kit provides a comprehensive selection of burs that are needed for crown preparations.

Kit of 14 burs:

G828-314-022:

The 0.3mm depth cutting bur is used to make surface depth grooves to guide accurate tooth reduction during preparation for minimal thickness ceramic veneers.

G828-314-026:

828-026 is a 0.5mm depth cutting bur used to make surface depth grooves to guide accurate tooth reduction during preparation for veneers and crowns.

G828-314-030:

This 0.7mm depth cutting bur is used to make surface depth grooves to guide accurate tooth reduction during preparation for deep ceramic veneers and crowns.

G850-314-014:

This bur has a tip diameter of approx. 0.9 –1.0mm. So placing the tip to one third of its depth provides a suitable narrow chamfer for metal margins. The taper is suitable for crown and veneer preparation.

G850L-314-018:

The tip diameter of this bur is approx. 1.1 –1.2mm with a taper suited to crown preparation. A longer bur is often required for upper anterior teeth or overerupted posterior teeth.

G856-314-014:

856-014 has a tip diameter of approx. 0.8 –0.9mm for crown preparation particularly for ceramic crowns and ceramic veneers.

G856-314-021:

The tip diameter of this bur is approx. 1.1 –1.2mm and is suitable for crown preparation for ceramic margins and all-ceramic crowns.

G392-314-021:

392-021 is used for initial interproximal reduction where space is limit. It can also be used for removal of interproximal ledges and marginal excess of restorative materials.

G839-314-014:

The end cutting bur with safe sides for marginal finishing is used to remove any enamel rim which is often created by the use of round ended crown preparation burs

G379-314-023:

This egg shaped bur is designed for palatal and occlusal contouring during tooth preparation for crowns and bridges.

G379-314-023:

This bur is designed for finishing palatal and occlusal contours, and tooth preparation for minimally invasive resin-bonded bridges. It can also be useful for finishing composite restorations on occlusal and palatal surfaces.

G860-314-014:

The fine flame is used for finishing all surface contours and can also be useful for finishing composite restorations.

An excellent marginal fit is key to restoration longevity and success. Excellent fit requires good marginal preparation. Restorations fail at the margins more than anywhere else, leading to adhesive failure of the bond or cement wash-out, leakage and pulp symptoms. This kit provides a comprehensive selection of burs that are needed for crown preparations.

Kit of 14 burs:

G828-314-022:

The 0.3mm depth cutting bur is used to make surface depth grooves to guide accurate tooth reduction during preparation for minimal thickness ceramic veneers.

G828-314-026:

828-026 is a 0.5mm depth cutting bur used to make surface depth grooves to guide accurate tooth reduction during preparation for veneers and crowns.

G828-314-030:

This 0.7mm depth cutting bur is used to make surface depth grooves to guide accurate tooth reduction during preparation for deep ceramic veneers and crowns.

G850-314-014:

This bur has a tip diameter of approx. 0.9 –1.0mm. So placing the tip to one third of its depth provides a suitable narrow chamfer for metal margins. The taper is suitable for crown and veneer preparation.

G850L-314-018:

The tip diameter of this bur is approx. 1.1 –1.2mm with a taper suited to crown preparation. A longer bur is often required for upper anterior teeth or overerupted posterior teeth.

G856-314-014:

856-014 has a tip diameter of approx. 0.8 –0.9mm for crown preparation particularly for ceramic crowns and ceramic veneers.

G856-314-021:

The tip diameter of this bur is approx. 1.1 –1.2mm and is suitable for crown preparation for ceramic margins and all-ceramic crowns.

G392-314-021:

392-021 is used for initial interproximal reduction where space is limit. It can also be used for removal of interproximal ledges and marginal excess of restorative materials.

G839-314-014:

The end cutting bur with safe sides for marginal finishing is used to remove any enamel rim which is often created by the use of round ended crown preparation burs

G379-314-023:

This egg shaped bur is designed for palatal and occlusal contouring during tooth preparation for crowns and bridges.

G379-314-023:

This bur is designed for finishing palatal and occlusal contours, and tooth preparation for minimally invasive resin-bonded bridges. It can also be useful for finishing composite restorations on occlusal and palatal surfaces.

G860-314-014:

The fine flame is used for finishing all surface contours and can also be useful for finishing composite restorations.

Key Specifications

TECHNICAL SPECIFICATIONS:

Head diameter in
1/10 mm
Speed range
(r.p.m.)
008 – 010 75.000 – 150.000
012 – 014 60.000 – 110.000
016 – 018 45.000 – 88.000
021 – 023 40.000 – 75.000
025 – 027 30.000 – 65.000
029 – 031  25.000 – 56.000
033 – 040 22.000 – 45.000
042 – 050 20.000 – 37.000
055 – 060 17.000 – 32.000
065 – 080 13.000 – 26.000
085 – 100 12.000 – 24.000
120 – 140  8.000 – 15.000
160 – 180 6.000 – 12.000
200 – 220 5.000 – 11.000
Video
packaging

Kit of 12 Burs:

  • 1 x G828-022
  • 1 x G828-026
  • 1 x G828-030
  • 1 x G850-014
  • 1 x G850L-018
  • 1 x G856-014
  • 1 x G856-021
  • 1 x G392-021
  • 1 x G839-014
  • 1 x G379-023
  • 1 x G379-023
  • 1 x G860-014
Additional Information

Additional Information

Dispatch Date No
COD Yes
FAQs N/A
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

SS White Bullet Finishing Bur-12 Blades #7802
ss white bullet finishing bur-12 blades #7802
Trimming & Finishing Bur
  • Rs.600.00

    Rs.550.00

    bulk price: Rs.530.00
    8.3% off
Ss White Cone Finishing Bur-12 Blades #7204
ss white cone finishing bur-12 blades #7204
Trimming & Finishing Burs
  • Rs.600.00

    Rs.550.00

    bulk price: Rs.530.00
    8.3% off
SS White Great White Gold Tapered Fissure Bur GW701
ss white great white gold tapered fissure bur gw70...
Carbide Bur
  • Rs.500.00

    Rs.400.00

    bulk price: Rs.380.00
    20% off

Sold out

Ss White Great White Ultra Football Egg 379-023
ss white great white ultra football egg 379-023
Crown Preparation Bur
  • Rs.2,750.00

    Rs.1,925.00

    30% off
Coltene Diatech Crown Preparation Kit
coltene diatech crown preparation kit
Crown Preparation Kit
  • Rs.4,650.00

    Rs.3,655.00

    21.4% off
SS White Great White Ultra Burs
ss white great white ultra burs
Crown Preparation Burs
  • Starting at: Rs.1,925.00

    30% off
Ultradent Porcelain Etch And Silane Kit
ultradent porcelain etch and silane kit
Porcelain Etch and Silane
  • Rs.3,888.00

    Rs.2,600.00

    bulk price: Rs.2,500.00
    33.1% off

Sold out

SS White Great White Z
ss white great white z
Carbide Burs
  • Starting at: Rs.850.00

    15% off
SS White Great White Gold Surgical Burs
ss white great white gold surgical burs
Surgical Carbide Bur
  • Starting at: Rs.450.00

    18.2% off

Sold out

SS White Inverted Taper Finishing Bur-12 Blades #7303
ss white inverted taper finishing bur-12 blades #7...
Trimming & Finishing Burs
  • Rs.600.00

    Rs.550.00

    bulk price: Rs.530.00
    8.3% off

Recently Viewed Products