Diadent D-Lux LED Light Cure

Diadent D-Lux LED Light Cure

Dia-Dent

Product has been currently sold out Click Here to get notified when it get back in stock.

Cordless LED Curing Light
New Rs. 11000

Rs.14,000.00

Rs.11,000.00

Reward points220 i These are the coins gained on 1 quantity of the product ordered. These points will transfer in to your account after successful delivery of your order. Know more

EMI starts from Rs.533.35   View Plans >

Description

Details

D-Lux is a new advanced cordless LED curing light. Made from the highest quality aluminum, D-Lux dissipates heat quickly to prevent overheating problem so that it can produce the maximum light intensity safely and consistently. With its lightweight and ergonomic design, D-Lux is easy to use and highly portable. Its battery pack can easily be replaced. Without taking out the battery from the hand-piece completely, the power can be shut off by using the Power switch. With advanced built-in protection circuit modules (to protect over-charging and over- discharging), D-Lux is reliable and safe to use. OLED display panel conveniently indicates battery life and a countdown timer for the next needed charge. With D-Lux's fast charging system, the battery can be fully charged in 90 minutes.

D-Lux also has 5 versatile curing modes for every indication, such as turbo mode, soft start mode and pulse mode. Soft-start mode and pulse mode can reduce the rapid contraction when the composite resin material is being cured by the curing light.

5 CURING MODES:

  • 5 Max: Maximum light intensity output for 5 seconds
  • 10 Max: Maximum light intensity output for 10 seconds
  • 20 Mid: 70% output of maximum light intensity for 20 seconds
  • 20 Soft: An initial 10% output of maximum light intensity that gradually increases to full power in 10 seconds, followed by 10 seconds output at full power.
  • 20 Pulse: Pulses every 0.15 seconds for 20 seconds at maximum light intensity
  • If the battery display lamp is blinking during the procedure, it means battery capacity is almost exhausted. It should be recharged or changed promptly in order for the device to be fully functional
  • Hand-piece turns off automatically if it is not in use for 4 minutes. (sleep mode)

D-Lux is a new advanced cordless LED curing light. Made from the highest quality aluminum, D-Lux dissipates heat quickly to prevent overheating problem so that it can produce the maximum light intensity safely and consistently. With its lightweight and ergonomic design, D-Lux is easy to use and highly portable. Its battery pack can easily be replaced. Without taking out the battery from the hand-piece completely, the power can be shut off by using the Power switch. With advanced built-in protection circuit modules (to protect over-charging and over- discharging), D-Lux is reliable and safe to use. OLED display panel conveniently indicates battery life and a countdown timer for the next needed charge. With D-Lux's fast charging system, the battery can be fully charged in 90 minutes.

D-Lux also has 5 versatile curing modes for every indication, such as turbo mode, soft start mode and pulse mode. Soft-start mode and pulse mode can reduce the rapid contraction when the composite resin material is being cured by the curing light.

5 CURING MODES:

  • 5 Max: Maximum light intensity output for 5 seconds
  • 10 Max: Maximum light intensity output for 10 seconds
  • 20 Mid: 70% output of maximum light intensity for 20 seconds
  • 20 Soft: An initial 10% output of maximum light intensity that gradually increases to full power in 10 seconds, followed by 10 seconds output at full power.
  • 20 Pulse: Pulses every 0.15 seconds for 20 seconds at maximum light intensity
  • If the battery display lamp is blinking during the procedure, it means battery capacity is almost exhausted. It should be recharged or changed promptly in order for the device to be fully functional
  • Hand-piece turns off automatically if it is not in use for 4 minutes. (sleep mode)
Features
  • OLED panel: unique and advanced one-button control
  • Cordless, highly portable, and lightweight (only 155 g)
  • Unique ergonomic design: provides comfortable grip and easy-to-read OLED panel
  • Durable one-piece aluminum design is robust and easy to disinfect
  • A high intensity of 1,600 mW/cm2 offers fast and reliable polymerization
  • High-performance lithium-ion battery technology:
  • * A new fully charged battery provides 160 x 10-second cures 
  • * OLED panel conveniently indicates battery life and a countdown timer for the next needed charge
  • * Battery can be fully recharged in 90 minutes
Key Specifications

TECHNICAL DATA:

  • Light wavelength range:420-490nm
  • Light intensity: 1,600 mW/cm
  • Charging time: Approx 1 hr 30 mins
Directions to use

Hand-piece Components Installation

Step 1. Insert the light guide fully into the hand-piece. * For best result, check to see if the light guide is completely inserted into the hand-piece

Step 2. Put the Plastic Protector onto the light guide

Step 3. Turn on the Power Switch button at bottom of the hand-piece.

Charger Installation & Charging Unit

Step 1. Place the charger on a secure flat surface

Step 2. Connect the power cord to the charger power supply

Step 3. Connect charger power supply to the Charger Base

Step 4. Seat the hand-piece into the Charger Base as shown in the picture. * Light indicator on the Charger Base will change from red to blue once the battery is fully charged. If the battery pack is broken or needs to be replaced, light indicator will be blinking red

Step 5. To fully charge the battery, it will take approximately 1.5 hour

Function Setup

1. When the light is off on OLED panel, turn on the Power Switch button at the bottom of the hand-piece or press the MODE button to turn on the OLED panel

2. When MODE button is pressed, OLED Panel will display: 5 Max, 10 Max, 20 Mid, 20 Soft, and 20 Pulse. (See Hand-piece Features for Mode Functions.)

3. When you press the Operation button on the OLED Panel, it will initiate the selected curing mode. When you press the button during operation, the program will stop. The light intensity output time is displayed on the OLED panel in numbers.

Charger Features

1. Charger has one display light indicator and the light indicator is not on unless the hand-piece is seated and connected into the Charger Base

2. When the hand-piece is seated into the Charger Base, the light indicator will turn red. Light indicator will turn blue once the battery is fully charged. If the battery is not fully charged, light indicator will turn red and charging will begin

3. When the hand-piece is seated into the Charger Base, light indicator can turn either red or blue. If the light indicator is not turned on, it means the hand-piece is not properly connected to the Charger Base. In this case, the hand-piece should be repositioned and reseated into the Charger Base

4. If the light indicator is blue, the battery is fully charged. (If the light indicator is blue, it is recommended for users to continue charging the device for about 10 - 20 minutes in order for the device to reach its full capacity.)

5. When the light indicator is blinking red, the hand-piece should be repositioned and reseated into the Charger Base. (If the light indicator continues to blink red after the procedure, the battery may be defective. Do not use this battery again.)

6. If the light indicator does not turn on even when the hand-piece is properly connected and seated, the battery may be defective. The battery should be replaced. * Due to D-Lux's fast charging system, it is normal for a little heat to be generated during the charging procedure.

 

DISINFECTION:

  • The device should be cleaned with dry soft wipes
  • DO NOT use abrasive material such as scouring powder, organic solvents, or solvent-based cleaning fluids. In case of severe contamination, gently clean the device by using diluted alcohol
  • DO NOT use pure alcohol-based solutions
  • Turn off the Power Switch at the bottom of the hand-piece and store the device in the box if it is not to be used for an extended period of time
  • DO NOT autoclave the hand-piece
  • DO NOT autoclave the light guide
  • Light emitted by LED can be harmful and should never be directed towards the eyes. Direct exposure to the light may damage the eyesight.

Warranty
This product does not carry any manufacturer/importer warranty.
packaging
  • D-Lux Hand-piece
  • Charger Base
  • Light Guide
  • Battery
  • Plastic Protector
  • Power Supply and Cord
Additional Information

Additional Information

Dispatch Date No
Expiry Date Dentalkart believes in providing the Longest Expiry available for the demanded product. Please Note: Minimum 1 year Or Longest 2-3 years long expiry will certainly be provided.
COD Yes
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Hu-Friedy S6 Gingival Cord Packer
hu-friedy s6 gingival cord packer
Ideal blade thickness with angle and bla...
  • Rs.1,944.00
Hu-Friedy 1 Standard Pedo Forceps
hu-friedy 1 standard pedo forceps
Standard Pedo Series Upper Incisors and ...
  • Rs.7,468.00
API Needle Holder Premium
api needle holder premium
Needle Holder
  • Starting at: Rs.960.00

    20% off
Gdc Cement Spatula #4 (Cs4)
gdc cement spatula #4 (cs4)
Spatula
  • Rs.550.00

    Rs.475.00

    13.6% off
Micro Mega Inget Glide Path Files / G Files
micro mega inget glide path files / g files
NiTi Files
  • Starting at: Rs.2,247.00

    24.3% off
Top Dent Tongue Depressor
top dent tongue depressor
Top Dent Tongue Depressor
  • Rs.712.00
Hu-Friedy 4/5 Discoid-Cleoid Carver
hu-friedy 4/5 discoid-cleoid carver
Used to carve anatomical features and tr...
  • Rs.2,035.00
Gdc Gracey Curettes S/9 (10mm) Instruments Kit (GCWC9)
gdc gracey curettes s/9 (10mm) instruments kit (gc...
Gracey Curettes
  • Rs.14,454.00

    Rs.11,702.00

    19% off
Pwortho Passive Self-Ligating Brackets with Free Tool
pwortho passive self-ligating brackets with free t...
Self Ligating Brackets
  • Starting at: Rs.3,000.00

    33.3% off

Recently Viewed Products