DMG Honigum Putty & Light Body

DMG Honigum Putty & Light Body

Dmg

Putty & Light Body
New Rs. 1700

Starting at: Rs.1,700.00

Dmg Honigum Putty + Light Body Kit
  • Buy 2 or above for Rs.6,600.00 each and save 2%
  • Buy 4 or above for Rs.6,500.00 each and save 3%

Rs.8,900.00

Rs.6,680.00

bulk price: Rs.6,500.00
DMG Honigum Putty

Rs.6,700.00

Rs.4,795.00

DMG Honigum Mix Star Putty

Rs.4,800.00

Rs.4,400.00

DMG Honigum Heavy Mix Star

Rs.4,800.00

Rs.4,400.00

DMG Honigum Heavy AutoMix

Rs.2,200.00

Rs.1,700.00

DMG Honigum Mono Mix Star

Rs.4,800.00

Rs.4,400.00

DMG Honigum Mono Auto Mix

Rs.2,200.00

Rs.1,700.00

DMG Honigum Light Body

Rs.2,200.00

Rs.1,900.00


OR
Description

Details

Honigum-Putty offers extraordinary recovery after deformation thus facilitating a precise reproduction of the oral situation. A precise detail reproduction is guaranteed.

Thanks to the DMG-developed Snap-Set technology the new Honigum-Putty offers a so far unrivaled combination of comfortable working time and short time in mouth. Its generous working time reduces the »mix stress« to a minimum. Deformations due to already set material are prevented, and micro movements are reduced by the quicker cross linking. For the patient the shorter time in mouth translates into significantly more comfort during the treatment.

Honigum-Putty is an impression material based on addition curing silicones. The material is available as a hand-mix version and in the ready-to-use pre-filled MixStar cartridge, which is suitable for use in the DMG MixStar-eMotion and other commercially available mixing machines.

Honigum MixStar Putty is a dynamically mixed true putty. It is the first VPS impression material with a putty consistency available in a MixStar cartridge.

Honigum Quad FastHeavy Body Material/Heavy mix star is a fast-setting, teal tray material perfect for fast double-phase quadrant and single-unit impressions. Honigum is a hydrophilic poly vinylsiloxane impression material with a patented microcrystalline wax matrix that lowers its viscosity under bite pressure to flow into the most difficult to reach subgingival areas. It also provides a slump free starting thickness for easy tray dispensing. The quick snap set prevents distortion, yet it is easy to remove. Honigum's pleasant honey aroma and neutral taste make the material extremely patient-friendly.

INDICATIONS FOR HEAVY MIXSTAR PUTTY:

  • Indications
  • Crown and bridge impressions
  • Inlay and onlay impressions
  • All types of pickup impressions, e.g. for implants and telescopes

Composition

  • Vinyl polysiloxanes
  • Hydrogen polysiloxanes
  • Silicium dioxide
  • Pigments
  • Additives
  • Platinum catalyst

Recommended use

Double-mix impressions

1. Fill the tray with Honigum-Putty.

2. Syringe the preparation with Honigum-Light. Observe the associated instructions for use! Note: The filling of the tray and syringing should be completed at the same time as the higher temperature in the mouth leads to a quicker setting of the syringed material compared to the tray material. 3. Position the filled tray in the mouth within the working time, slowly and using very little force, and allow the impression to form. 4. Remove the impression from the mouth once the setting time has elapsed,

INDICATIONS:

  • Crown and bridge impressions
  • Inlay and onlay impressions

Honigum-Putty offers extraordinary recovery after deformation thus facilitating a precise reproduction of the oral situation. A precise detail reproduction is guaranteed.

Thanks to the DMG-developed Snap-Set technology the new Honigum-Putty offers a so far unrivaled combination of comfortable working time and short time in mouth. Its generous working time reduces the »mix stress« to a minimum. Deformations due to already set material are prevented, and micro movements are reduced by the quicker cross linking. For the patient the shorter time in mouth translates into significantly more comfort during the treatment.

Honigum-Putty is an impression material based on addition curing silicones. The material is available as a hand-mix version and in the ready-to-use pre-filled MixStar cartridge, which is suitable for use in the DMG MixStar-eMotion and other commercially available mixing machines.

Honigum MixStar Putty is a dynamically mixed true putty. It is the first VPS impression material with a putty consistency available in a MixStar cartridge.

Honigum Quad FastHeavy Body Material/Heavy mix star is a fast-setting, teal tray material perfect for fast double-phase quadrant and single-unit impressions. Honigum is a hydrophilic poly vinylsiloxane impression material with a patented microcrystalline wax matrix that lowers its viscosity under bite pressure to flow into the most difficult to reach subgingival areas. It also provides a slump free starting thickness for easy tray dispensing. The quick snap set prevents distortion, yet it is easy to remove. Honigum's pleasant honey aroma and neutral taste make the material extremely patient-friendly.

INDICATIONS FOR HEAVY MIXSTAR PUTTY:

  • Indications
  • Crown and bridge impressions
  • Inlay and onlay impressions
  • All types of pickup impressions, e.g. for implants and telescopes

Composition

  • Vinyl polysiloxanes
  • Hydrogen polysiloxanes
  • Silicium dioxide
  • Pigments
  • Additives
  • Platinum catalyst

Recommended use

Double-mix impressions

1. Fill the tray with Honigum-Putty.

2. Syringe the preparation with Honigum-Light. Observe the associated instructions for use! Note: The filling of the tray and syringing should be completed at the same time as the higher temperature in the mouth leads to a quicker setting of the syringed material compared to the tray material. 3. Position the filled tray in the mouth within the working time, slowly and using very little force, and allow the impression to form. 4. Remove the impression from the mouth once the setting time has elapsed,

INDICATIONS:

  • Crown and bridge impressions
  • Inlay and onlay impressions
Features
  • Unique Snap-Set technology (long working time and short time in mouth)
  • Excellent recovery after deformation
  • Excellent dimensional stability
  • Prevents mixing stress
  • No premature setting of the material
  • Short time in mouth
  • High patient comfort
  • Reduced micro movements
  • Excellent recovery after deformation
  • Highest precision
Key Specifications

Interactions

  • Rinse off residues of retraction solutions thoroughly with water because they can increase the setting time in some instances
  • Never allow the impression to come into contact with organic solvents or liquids containing solvents as this may result in a swelling of the material and may therefore lead to inaccuracies in the cast
  • Never allow the impression material to come into contact with latex gloves. DMG recommends the use of PVC or PE based gloves.
  • Do not mix Honigum-Putty with condensation curing silicone or polyether impression materials.
packaging
Click here to buy the Compatible Gun Click here to buy the Compatible Tips

Honigum Putty:

  • 2 x 450ml jars

Honigum Mix Star Putty:

  • 1 x 380 ml mix star cartiridge

Honigum  Heavy Mix Star:

  • 1 x380 ml mix star cartiridge
  • 10 x MixStar Tips

Honigum Heavy Automix:

  • 2 x 50ml cartirides
  • 6 x AutoMix Tips

Honigum Mono Mix Star:

  • 1 x 380 ml mix star cartiridge
  • 10 x MixStar Tips

Honigum Mono Auto Mix:

  • 2 x 50ml cartirides
  • 6 x AutoMix Tips

Honigum Light Body:

  • 2 x 50ml cartridges (Dispensing Gun & Tips Compatibility : 1:1)
Additional Information

Additional Information

Dispatch Date Next Day
Expiry Date N/A
COD Yes
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Premier Dental Compcore Af
premier dental compcore af
Dual-Cure Composite Core Build-Up Materi...
  • Rs.5,488.00

    Rs.5,108.00

    6.9% off
Voco Rebilda Dc - Set & Refills
voco rebilda dc - set & refills
Core Build-Up Material
  • Starting at: Rs.4,000.00

    11.4% off
Medicept Accutemp
medicept accutemp
Temporary Crown &Bridge Material
  • Rs.5,346.00

    Rs.4,482.00

    16.2% off
Dentsply Aquasil Ultra LV Light Body
dentsply aquasil ultra lv light body
Light Body Impression Material
  • Rs.5,175.00
3m Espe Sof-Lex Spiral Wheels - Trial Kit
3m espe sof-lex spiral wheels - trial kit
Finishing & Polishing Wheel
  • Rs.2,500.00

    Rs.2,300.00

    8% off
Sun Medical V-Primer
sun medical v-primer
Bonding Agent
  • Rs.3,000.00

    Rs.2,500.00

    16.7% off
Dmg Silagum Putty With Light Body Kit
dmg silagum putty with light body kit
Putty with Light Body
  • Rs.7,050.00

    Rs.4,795.00

    bulk price: Rs.4,790.00
    32% off
Gdc Edentulous Perforated Impression Trays Lower # 3 (Itrledpl3)
gdc edentulous perforated impression trays lower #...
ImpressionTrays
  • Rs.352.00

    Rs.297.00

    15.6% off
Oro Denture Box With Tray
oro denture box with tray
Denture Box with Tray
  • Rs.130.00

    Rs.95.00

    26.9% off

Recently Viewed Products