DMG PermaCem 2.0 Smartmix

DMG PermaCem 2.0 Smartmix

Dmg

Availability: In stock

Self Adhesive Luting Cement
New 3795.00

Starting at: Rs.3,795.00

Bulk prices available. For customized prices - click here

DMG PermaCem 2.0 Smartmix Transparent

Rs.3,850.00

Rs.3,795.00

DMG PermaCem 2.0 Smartmix A2

Rs.3,850.00

Rs.3,795.00

DMG PermaCem 2.0 Smartmix A3

Rs.3,850.00

Rs.3,795.00


Check COD
  • Enter pincode to check whether Cash On Delivery is available.
  • Delivery available at all pincodes.
  • Generally delivered in 4 - 5 working days.
  • Free Shipping Above ₹2500.
  • COD Not available for Order Above ₹20000 or Above 10Kg.
OR
Description

Details

PermaCem2.0 by DMG America provides an exceptional self-adhesive bond to Zirconium! This universal, dual-cure composite luting cement can be used for the permanent cementation of crowns, bridges, inlays, onlays, and root posts without the need for separate enamel and dentin bonding. By incorporating a recently developed adhesive monomer formula, PermaCem 2.0 offers an exceptional bond across all substrates. Plus, as a single-step cement, it provides the added benefit of not requiring an etching step, which saves time and reduces post-op sensitivity. It also features a lower water sorption rate for greater reliability and improved esthetics. It is exceptionally flowable under pressure and excess can be quickly removed for fast and easy clean-up. 

 

COMPOSITION:

  • Barium glass in a Bis-GMA-based matrix of dental resins, pigments, additives and catalysts
  • Filler content: 69 % by weight = 51 by vol. % (0.02 – 3.0 μm)

 

INDICATIONS:

  • Permanent cementation of inlays, onlays, crowns, bridges and root posts composed of metal and metal alloys (precious and non-precious metals), metal ceramics and composites, all-ceramics such as zirconium oxide, aluminum oxide and all forms of silicate ceramics (e.g. lithium disilicate, feldspar), as well as fiber-reinforced composites (root posts)
  • Permanent cementation of crowns and bridges on implant abutments comprised of titanium or zirconia

 

 CONTRAINDICATIONS:

Do not use the material: If the preparation does not offer sufficient retention (e.g. as in the case of veneers)

In cases of allergies to any of the ingredients or in cases of contact allergies

For direct capping of the pulp tissue

 

INTERACTION:

Products containing eugenol, for example temporary cements or temporary root canal filling materials, may impair curing of the composite luting cement.

Do not use products containing eugenol and other substances that inhibit polymerization together with the material.

If possible, use eugenol-free cements (e.g. TempoCem NE). Make sure that any residual cement is completely removed from the preparation or core following removal of the temporary restoration. From the beginning of pretreatment until permanent cementation, ensure that neither the restoration nor the tooth surfaces become contaminated.

 

ADVANTAGES:

Superior Compressive Strength

Reliability at 249 MPa*

Dependable, long-term adhesion

Outstanding Radiopacity

Easy identifi cation of marginal gap quality and clinical diagnosis

Reliable monitoring, even of post-endodontic restorations

Excellent Shade Stability

Convenient to Work with

Practical working times for a convenient course of treatment

Reduction in operational steps

Quick application with multiple-step operations/restorations

Avoidance of cementation errors

Special Easy Clean-up Formula for

An ideal combination of stability and fl owability for a thin and continuous cement coating

Time-saving application

Exceptional fl owability under pressure

The fastest and easiest excess removal of all other self-adhesive cements

Minimal Water Sorption for

Improved esthetics

Greater reliability

Good control of expansion forces

PermaCem2.0 by DMG America provides an exceptional self-adhesive bond to Zirconium! This universal, dual-cure composite luting cement can be used for the permanent cementation of crowns, bridges, inlays, onlays, and root posts without the need for separate enamel and dentin bonding. By incorporating a recently developed adhesive monomer formula, PermaCem 2.0 offers an exceptional bond across all substrates. Plus, as a single-step cement, it provides the added benefit of not requiring an etching step, which saves time and reduces post-op sensitivity. It also features a lower water sorption rate for greater reliability and improved esthetics. It is exceptionally flowable under pressure and excess can be quickly removed for fast and easy clean-up. 

 

COMPOSITION:

  • Barium glass in a Bis-GMA-based matrix of dental resins, pigments, additives and catalysts
  • Filler content: 69 % by weight = 51 by vol. % (0.02 – 3.0 μm)

 

INDICATIONS:

  • Permanent cementation of inlays, onlays, crowns, bridges and root posts composed of metal and metal alloys (precious and non-precious metals), metal ceramics and composites, all-ceramics such as zirconium oxide, aluminum oxide and all forms of silicate ceramics (e.g. lithium disilicate, feldspar), as well as fiber-reinforced composites (root posts)
  • Permanent cementation of crowns and bridges on implant abutments comprised of titanium or zirconia

 

 CONTRAINDICATIONS:

Do not use the material: If the preparation does not offer sufficient retention (e.g. as in the case of veneers)

In cases of allergies to any of the ingredients or in cases of contact allergies

For direct capping of the pulp tissue

 

INTERACTION:

Products containing eugenol, for example temporary cements or temporary root canal filling materials, may impair curing of the composite luting cement.

Do not use products containing eugenol and other substances that inhibit polymerization together with the material.

If possible, use eugenol-free cements (e.g. TempoCem NE). Make sure that any residual cement is completely removed from the preparation or core following removal of the temporary restoration. From the beginning of pretreatment until permanent cementation, ensure that neither the restoration nor the tooth surfaces become contaminated.

 

ADVANTAGES:

Superior Compressive Strength

Reliability at 249 MPa*

Dependable, long-term adhesion

Outstanding Radiopacity

Easy identifi cation of marginal gap quality and clinical diagnosis

Reliable monitoring, even of post-endodontic restorations

Excellent Shade Stability

Convenient to Work with

Practical working times for a convenient course of treatment

Reduction in operational steps

Quick application with multiple-step operations/restorations

Avoidance of cementation errors

Special Easy Clean-up Formula for

An ideal combination of stability and fl owability for a thin and continuous cement coating

Time-saving application

Exceptional fl owability under pressure

The fastest and easiest excess removal of all other self-adhesive cements

Minimal Water Sorption for

Improved esthetics

Greater reliability

Good control of expansion forces

Features
  • One of the strongest self-adhesive bond to Zirconium Available
    • Prevents adhesion failures, ending unneeded follow up visits
  • Mechanical and chemical adhesion
    • Outstanding bond across all substrates
  • Bonds to all substrates
    • Single adhesive that simplifies day-to-day operations
  • No etching step needed
    • Saves time compared to standard bonding procedures
  • Lower water sorption rate
    • Easier to work with
  • Drip resistant and easy cleanup
    • Shorter appointment, better satisfied patient
Key Specifications

TECHNICAL DATA:

Removal of excess (without light curing) :0:30–1:00 min

Pre-light curing time to make removal of excess more feasible (optional) :1–2 s

Max. intraoral curing time (including mixing time) :7:00 min

Light curing time (optional) : min. 20 s

 

INSTRUCTIONS TO USE:

  • Ambient light may lead to premature curing of the composite luting cement.
  • You must therefore protect PermaCem 2.0 from ambient light after expressing it from the Smartmix syringe. Ensure that excess cement in hard-to-reach areas (proximal, marginal gingival areas) is removed promptly.
  • The PermaCem 2.0 curing process can be accelerated. In order to do so, cure PermaCem 2.0 using a suitable curing light.
  • Light-curing units should have an output of 450 nm and should be checked regularly.
  • The light intensity should be a minimum of 400 mW/cm². Place the light as close as possible to the material.
Directions to use

For luting indirect restorations such as crowns, bridges, inlays and onlays

1. Prepare the clean and dry restoration as follows: Etchable silicate ceramic: etch the restoration with 5 % hydrofluoric acid in accordance with the instructions from the manufacturer of the etching gel and rinse thoroughly using a water spray. Subsequently dry with air that is free of oil and water, and prepare the surface using a silanizing agent (e.g. Vitique Silane) in accordance with the manufacturer’s instructions. Oxide ceramics, metals and metal alloys: pretreat in accordance with the manufacturer’s instructions. Unless otherwise stated, sandblast the inside of the restoration with aluminum oxide, clean with alcohol, and dry with oil- and water-free air. Other materials: pretreat in accordance with the manufacturer’s instructions.

2. If required, rinse the cavity or preparation thoroughly using a water spray to remove any residual temporary cement, and then dry. In doing so, ensure that the dentine retains a little residual moisture and does not become overly dry

3. Apply PermaCem 2.0 inside the pretreated restoration

4. Insert the restoration within 1:00 minute after mixing has begun and attach it to the prepared tooth using slight pressure

5. Remove excess cement within 0:30 to 1:00 minute of inserting the restoration with the aid of a microbrush, brush, foam pellet or scaler. Remove interdental excess carefully using dental floss. It is alternatively possible to remove excess cement by briefly curing it using light (1–2 seconds) and then removing it with a scaler

6. Instruct the patient to adopt habitual occlusion

7. Allow the material to chemically cure fully for 7:00 min from the start of mixing

8. In the case of translucent restorations, additionally cure the material using a suitable curing light for at least 20 seconds.

Cementation of root posts

1. Endodontically prepare the root canal, clean it, and dry it using a paper point. Ensure that the dentine retains a little residual moisture and does not become overly dry. 2. Prepare the clean and dry root post as follows:

Fiber-reinforced root post (e.g. LuxaPost): Clean the root post with ethanol, dry with air that is free of oil and water, and apply silane (e.g. Vitique Silane) where appropriate in accordance with the manufacturer’s instructions

Root posts from other materials: pretreat in accordance with the manufacturer’s instructions

3. Apply PermaCem 2.0 directly into the prepared canal with the aid of the appropriate tip. In doing so, insert the tip as deeply as possible into the canal.

Note: During the application of the composite luting cement, ensure that the tip remains submersed in the material and that it is only moved upwards with the rising material. 4. Insert the root post within 1:00 minute after mixing has begun and cement using slight pressure.

5. Remove the excess cement within 0:30 seconds to 1:00 minute of inserting the root post with the aid of a microbrush, brush, foam pellet or scaler

6. Allow the material to chemically cure fully for 7:00 min from the start of mixing. Note: The material can be additionally cured using a suitable curing light for at least aterial can be additionally cured using a suitable curing light for at least 2


packaging
  • 1 X 9g Smartmix Syringe
  • 15 x Smartmix Tips Standard
  • 5 x  Smartmix Tips - Endo M
Reviews

Hot Selling

DMG MiniDam
dmg minidam
Latex free Dam(Non-Autoclavable)
  • Rs.1,750.00

    Rs.1,695.00

    3.1% off
DMG LUXATEMP-FLUORESCENCE
dmg luxatemp-fluorescence
Temporary crown and bridge material
  • Starting at: Rs.2,450.00

    12.5% off
Dmg O - Bite (Bite Registration)
dmg o - bite (bite registration)
Vinyl Polysiloxane Bite Registration Mat...
  • Rs.3,000.00

    Rs.2,750.00

    bulk price: Rs.2,700.00
    8.3% off
Dmg Ionosit Base Liner
dmg ionosit base liner
Cavity Liner
  • Rs.1,850.00

    Rs.1,725.00

    6.8% off
Dmg Honigum Putty + Light Body Kit
dmg honigum putty + light body kit
Rubber Base Material
  • Rs.8,900.00

    Rs.6,895.00

    bulk price: Rs.6,500.00
    22.5% off
DMG Silagum Comfort
dmg silagum comfort
Denture Relining Material
  • Starting at: Rs.1,350.00

    3.6% off
DMG Contax
dmg contax
Adhesive System
  • Starting at: Rs.1,850.00

    7.5% off
DMG Silagum Putty & Light Body
dmg silagum putty & light body
Putty with Light Body
  • Starting at: Rs.2,200.00

    4.3% off
DMG Automix Dispenser
dmg automix dispenser
Dispensing Gun
  • Starting at: Rs.4,250.00

    5.6% off
DMG Tray Adhesive
dmg tray adhesive
Tray adhesive for all VPS materials
  • Rs.1,200.00

    Rs.1,095.00

    8.8% off

Related Products

There are no products matching the selection.

Recently Viewed Products