DMG SUPERTEC TRAYS

DMG SUPERTEC TRAYS

Dmg

Product has been currently sold out Click Here to get notified when it get back in stock.

Light-curing impression tray material
New Rs. 4595

Starting at: Rs.4,595.00

EMI starts from Rs.222.80   View Plans >

DMG Supertec Trays - Upper
  • Buy 2 or above for Rs.4,590.00 each and save 1%

Rs.5,250.00

Rs.4,595.00

bulk price: Rs.4,590.00
DMG Supertec Trays - Lower
  • Buy 2 or above for Rs.4,590.00 each and save 1%

Rs.5,250.00

Rs.4,595.00

bulk price: Rs.4,590.00
Description

Details

Supertec is a light-curing impression tray material used for the production of customized impression trays.

Wherever customized impression trays are needed for partial or full dentures, Supertec is the right choice. 
The prefabricated light-curing base plates are easy to form, adapt, and trim. Under normal laboratory light conditions Supertec can be processes for a long time and impresses with its uniform plate thickness.

The finished tray can be used immediately without requiring lengthy post-polymerization. The material’s modulus of elasticity provides excellent dimensional stability maintaining the tray’s original form in the galvanization process. 
In addition, Supertec is resistant to disinfecting agents. And another pleasant plus: Supertec is odorless.

 

Production of customized impression trays for precision impression taking in the field of partial and full dentures, as well as implantology

 

COMPOSITION:

Glass filler and pyrogenic silicic acid in an UDMA-based matrix of dental resins

 

ADVANTAGES:

  • Odorless
  • Easy to fabricate

 

Supertec is a light-curing impression tray material used for the production of customized impression trays.

Wherever customized impression trays are needed for partial or full dentures, Supertec is the right choice. 
The prefabricated light-curing base plates are easy to form, adapt, and trim. Under normal laboratory light conditions Supertec can be processes for a long time and impresses with its uniform plate thickness.

The finished tray can be used immediately without requiring lengthy post-polymerization. The material’s modulus of elasticity provides excellent dimensional stability maintaining the tray’s original form in the galvanization process. 
In addition, Supertec is resistant to disinfecting agents. And another pleasant plus: Supertec is odorless.

 

Production of customized impression trays for precision impression taking in the field of partial and full dentures, as well as implantology

 

COMPOSITION:

Glass filler and pyrogenic silicic acid in an UDMA-based matrix of dental resins

 

ADVANTAGES:

  • Odorless
  • Easy to fabricate

 

Features
  • Easy to form, adapt and trim
  • Long working time
  • Odorless
  • Surplus material can be re-used
  • Curing with standard laboratory light-units with UV- and/or halogen light (at least 240 to 520 nm)
  • Even thickness
Key Specifications

TECHNICAL DATA:

Transverse strength : > 60 MPa

Transverse modulus : > 4000 MPa

 

STORAGE& SHELF LIFE:

Store at room temperature (15 to 25 °C/59 to 77 °F)! ▸ Protect against exposure to direct sunlight! ▸ Do not use after the expiration date.

 

SIDE EFFECTS:

Do not apply the material in cases of allergies to any of the components or in the event of contact allergies.

Video
Directions to use

Recommended use

1. Block out undercuts on the model with a suitable material, e.g. silicone impression material

2. Mark the tray’s edge with a pencil and make a place-marker out of modeling wax. Note: Exposed gypsum parts should be treated with an alginate insulation. DMG recommends that the gypsum surfaces are irrigated

3. Remove protective cover from the prefabricated tray and adapt the tray to the model

4. Remove excess tray material along the pencil line with a modeling knife

5. Form a tray grip from the excess tray material and attach it to the model. 6. If necessary, smooth material junctions with petroleum jelly

7. Cure the impression tray on the model for approx. 3 minutes with a suitable light unit, e.g. Kulzer® XS* (UVA-VIS blended light/stroboscope).

Note: During curing it is possible to apply a light-curing varnish e.g. Dry Coat to the surface of the impression tray so that it is cured at the same time as the tray material. This creates a dry, shiny surface

8. If the impression tray is not treated with light-curing varnish, remove the dispersion layer with alcohol or acetone. If light-curing varnish is used this is not necessary

9. Let the place holder wax boil out

10. Remove the impression tray from the model and cure the underside for approx. 3 minutes with a suitable light source e.g. Kulzer® XS* (UVA-VIS mixed light/ stroboscope). Note: During curing it is possible to apply a light-curing varnish e.g. Dry Coat to the surface of the impression tray so that it is cured at the same time as the tray material. This creates a dry, shiny surface.

Note: The impression tray can be subsequently treated with corundum stones or fine carbide-fine cross-cut carbide burs. Wear suitable breathing protection when performing machining.


packaging

DMG Supertec Trays - Upper:

  • 50 trays upper jaw

DMG Supertec Trays - Lower

  • 50 trays lower jaw
Additional Information

Additional Information

Dispatch Date Next Day
Expiry Date N/A
COD Yes
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

SS White Great White Z
ss white great white z
Carbide Burs
  • Starting at: Rs.850.00

    15% off
Gdc Edentulous Perforated Impression Trays Upper # 2 (Itrledpu2)
gdc edentulous perforated impression trays upper #...
ImpressionTrays
  • Rs.352.00

    Rs.297.00

    15.6% off
Medicept Accutemp
medicept accutemp
Temporary Crown &Bridge Material
  • Rs.5,346.00

    Rs.4,482.00

    16.2% off
Indian Chip Blower With Nozzle
indian chip blower with nozzle
Chip Blower With Nozzel
  • Rs.59.00
Samit Cold Mould Seal
samit cold mould seal
Cold mould seal 110ml
  • Starting at: Rs.40.00

    60% off
Samit Fox Plane Plastic
samit fox plane plastic
Fox Plane Plastic
  • Rs.100.00

    Rs.70.00

    bulk price: Rs.60.00
    30% off
Coltene Diatech Crown Preparation Kit
coltene diatech crown preparation kit
Crown Preparation Kit
  • Rs.4,600.00

    Rs.4,200.00

    8.7% off
Strauss Porcelain Laminate Veneer Kit of 9 - PLSET1
strauss porcelain laminate veneer kit of 9 - plset...
Porcelain Laminate Veneer Kit
  • Rs.3,700.00
Dentsply Aquasil Ultra Lv Cartridges
dentsply aquasil ultra lv cartridges
Impression Material
  • Rs.5,175.00

    Rs.4,531.00

    12.4% off

Recently Viewed Products