DMG TempoCem NE

DMG TempoCem NE

Dmg

Availability: In stock

Temporary Luting Cement
New Rs. 2150

Starting at: Rs.2,150.00

DMG TempoCem NE Handmix

Sold out

Rs.2,200.00

Rs.2,150.00

DMG TempoCem NE Smartmix

Rs.2,200.00

Rs.2,150.00


OR
Description

Details

TempoCem NE zinc oxide non-eugenol cement is ideal for use in cases where a eugenol temporary cement is not recommended. Because any residue of eugenol may inhibit the polymerization of resin materials, TempoCem NE's non-eugenol formula is perfect for cases in which a resin material or a resin reinforced glass ionomer will be used for the final restoration.

 

COMPOSITION:

Catalyst paste: Natural resins, fatty acids, additives

Base paste: Zinc oxide, paraffin, additives

 

INDICATIONS:

Temporary cementation of provisional and permanent crowns and bridges, inlays and onlays.

CONTRAINDICATIONS:

Do not use the material in cases of allergies to any of the substances contained or, as can occur in rare cases, in the event of contact allergy.

 

TempoCem NE zinc oxide non-eugenol cement is ideal for use in cases where a eugenol temporary cement is not recommended. Because any residue of eugenol may inhibit the polymerization of resin materials, TempoCem NE's non-eugenol formula is perfect for cases in which a resin material or a resin reinforced glass ionomer will be used for the final restoration.

 

COMPOSITION:

Catalyst paste: Natural resins, fatty acids, additives

Base paste: Zinc oxide, paraffin, additives

 

INDICATIONS:

Temporary cementation of provisional and permanent crowns and bridges, inlays and onlays.

CONTRAINDICATIONS:

Do not use the material in cases of allergies to any of the substances contained or, as can occur in rare cases, in the event of contact allergy.

 

Features

Non-eugenol formulation 
•   Ideal for use in cases where a eugenol temporary cement is not recommended. 
•   Won't inhibit the polymerization of resin materials. 
•   Perfect for cases in which a resin material or a resin reinforced glass ionomer will be used for the final restoration.

Offers optimally adjusted adhesion 
•   Resists forces of mastication. 
•   Securely retains the restoration and maintains patient comfort. 
•   Is flexible under the crown for easy removal of the temporary.

Resistant to saliva 
•   Increases stability of cement in the mouth.

Biocompatible 
•   Protects the gingival tissue.

300+% radiopacity 
•   Visible on x-ray.

Easy flow 
•   Permits precise placement of cement and easy placement of the temporary.

No heat generated during setting 
•   Protects pulp.

Insulates prep against thermal sensitivity 
•   For greater patient comfort.

Less waste in cement tip than created by hand mixing 
•   More economical.

Key Specifications

TECHNICAL DATA:

Composition : Zinc oxide-non-eugenol

Working Time : 1 minute

Complete Setting Time : 4-5 minutes intra-orally

Film Thickness : ≤ 20μm

Compression Strength : <=35MPa

Radiopacity : ≥ 200%

Diametrical Tensile Strength :36 MPa

Mixing Ratio (Base/Catalyst) 10:1 (Volume)

 

BASIC SAFETY OINSTRUCTIONS:

  • Only for dental use!
  • Keep out of reach of children
  • Avoid contact with skin and eyes! In the event of accidental contact, rinse thoroughly with plenty of water immediately and consult a physician if necessary
  • Contains rosin

STORAGE & SHELF LIFE:

  • Store at room temperature (15 to 25 °C/59 to 77 °F) in a dry place!
  • Do not store in the refrigerator! ▸ Protect against exposure to direct sunlight!
  • After the application, leave the used mixing tip on the Automix cartridge to cap unused material!
  • Leave the used mixing cannula on the Smartmix injector after use. It serves as a cap!
  • Do not use after the expiration date!
Directions to use

Temporary cementation

1. Apply TempoCemNE to the dry temporary restoration

2. Insert the temporary restoration within 1:00 min of start of mixing and attach to the dry, prepared tooth using slight pressure

3. After curing, remove excess cement with a probe

4. It is easy to remove excess cement in large chunks

5. Remove interdental excess by flossing carefully

6. The light color of the material makes it easy to distinguish from teeth.

Using the Automix cartridge 

Insert cartridge

1. Push up the lever at the back of the Automix dispenser and pull back the slide completely.

2. Lift up the plastic lever, insert the cartridge and lock it using the plastic lever

Please note: Make sure that the notches on the cartridge line up with those on the Automix dispenser.

Attach mixing tip

1.Remove the cartridge cap or used mixing tip by turning it 90° counterclockwise, and discard it.

2. Attach a new mixing tip [E]. Please note: Make sure that the notches on the mixing tip line up with those on the cartridge.

3. Turn the mixing tip clockwise 90° to lock it.

Please note: Make sure that the notches on the mixing tip line up with those on the cartridge.

3. Turn the mixing tip clockwise 90° to lock it.

Apply material

When using a cartridge for the first time, squeeze out a pea-sized amount of material and discard it

The material is mixed in the mixing tip by pulling the trigger [F] of the Automix dispenser and it is then applied directly.

Please note: After the application, leave the used mixing tip on the cartridge to cap unused material!

Remove cartridge

1. Push up the lever at the back of the Automix dispenser and pull back the slide completely.

2. Lift up the plastic lever and remove the cartridge.

 

Disinfection of the Automix dispenser

The Automix dispenser is reusable after disinfection, although it should be replaced if visible signs of wear appear.

Disinfection can be carried out using a commercially available dipping disinfectant.

DMG recommends using only disinfecting solutions listed by the RKI (Robert Koch Institute).

The Automix dispenser is also autoclavable.

 

Side effects

Isolated cases of hypersensitivity or contact allergy to components of the material cannot be excluded


packaging

DMG TempoCem NE Smartmix:

  • 2 x 11g syringes
  • 20 x Smartmixing tips

DMG TempoCem NE Handmix:

  • 1 x 85g Base paste
  • 1 x 25g Catalyst paste.
Additional Information

Additional Information

Dispatch Date Next Day
COD Yes
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Tokuyama Bond Force
tokuyama bond force
Light Cure Dental Adhesive
  • Starting at: Rs.1,100.00

Sold out

Ammdent GI Fill Type II (Regular)
ammdent gi fill type ii (regular)
Glass Ionomer Cement
  • Rs.550.00

    Rs.350.00

    36.4% off
Ivoclar Vivadent Empress Direct Cavifil Refills
ivoclar vivadent empress direct cavifil refills
Restorative Capsules(Late delivery expec...
  • Starting at: Rs.4,300.00

    11.7% off

Sold out

Ammdent G I Core
ammdent g i core
Glass Ionomer Cement
  • Rs.950.00

    Rs.700.00

    bulk price: Rs.680.00
    26.3% off
Ivoclar Vivaglass Cem Pl Kit
ivoclar vivaglass cem pl kit
Glass ionomer cement
  • Rs.3,460.00

    Rs.2,796.00

    19.2% off
Oro Glass Dappen Dish
oro glass dappen dish
Glass Dappen Dish
  • Rs.100.00

    Rs.83.00

    17% off
Itena Totalcem (2018-11)
itena totalcem (2018-11)
Self-etching and self-adhesive permanent...
  • Rs.4,752.00

    Rs.3,564.00

    25% off

Sold out

Prima Dental Trimming And Finishing Needle Bur (7901) - 12 Blade Pk/1
prima dental trimming and finishing needle bur (79...
Trimming and Finishing - 12 Blade Needle...
  • Rs.534.00

    Rs.475.00

    11% off
Dentsply Chemfil Superior Refill 10g
dentsply chemfil superior refill 10g
Glass Ionomer Cement
  • Rs.1,800.00

    Rs.1,100.00

    38.9% off

Recently Viewed Products