Kulzer Gluma 5 Bond 4ml (Bond cum Desensitizer)

Kulzer Gluma 5 Bond 4ml (Bond cum Desensitizer)

Heraeus Kulzer

Product has been currently sold out Click Here to get notified when it get back in stock.

Bond
New Rs. 1200

Starting at: Rs.1,200.00

Heraeus Gluma 5 Bond 4ml - Bond Cum Desensitizer

Rs.1,750.00

Rs.1,200.00

Reward points500
Description

Details

5th Genration Bond

GLUMA Bond 5 is a light-cured single-component adhesive for use in adhesive restorative dentistry. GLUMA Bond 5 has been developed for the adhesive bonding of plastic filling materials (e.g. composites, compomer, Polyglas to dental hard substances and laboratory-fabricated restorations (e.g. ceramics). With GLUMA Bond 5, priming, bonding and desensitizing can be done in one step. GLUMA Bond 5 is an ethanol based solution of light-activated, adhesive resins. Before using GLUMA Bond 5, the dental hard substance is conditioned with an etching gel. (Etch & Rinse-technique)

Based on our long-term bonding expertise, we developed the 5th generation  etch & rinse one-bottle adhesive GLUMA Bond5. Produced to meet your everyday requirements for uncomplicated bonding, it exhibits excellent shear bond strength and ensures successful long-term restorations. GLUMA Bond5 produces excellent adhesion to the enamel and the dentine, as well as an optimal marginal sealing.

GLUMA Bond5 was developed for your comfort – in handling, performance and storage. It forms a homogeneous hybrid layer for safe sealing and high bond strength, especially on enamel. No shaking is needed before the application. GLUMA Bond5 can be stored at room temperature and is usable directly out of the bottle, without preparation time.

COMPOSITION:

  • Methacrylate
  • Ethanol
  • Fillers
  • Photoinitiators
  • Glutaraldehyde

INDICATIONS:

  • Adhesive fixing of direct composites, Polyglas® and compomer restorations.
  • Adhesive fixing of indirect laboratory-fabricated ceramic, Polyglas® and composite restorations (inlays, onlays, veneers and crowns).

5th Genration Bond

GLUMA Bond 5 is a light-cured single-component adhesive for use in adhesive restorative dentistry. GLUMA Bond 5 has been developed for the adhesive bonding of plastic filling materials (e.g. composites, compomer, Polyglas to dental hard substances and laboratory-fabricated restorations (e.g. ceramics). With GLUMA Bond 5, priming, bonding and desensitizing can be done in one step. GLUMA Bond 5 is an ethanol based solution of light-activated, adhesive resins. Before using GLUMA Bond 5, the dental hard substance is conditioned with an etching gel. (Etch & Rinse-technique)

Based on our long-term bonding expertise, we developed the 5th generation  etch & rinse one-bottle adhesive GLUMA Bond5. Produced to meet your everyday requirements for uncomplicated bonding, it exhibits excellent shear bond strength and ensures successful long-term restorations. GLUMA Bond5 produces excellent adhesion to the enamel and the dentine, as well as an optimal marginal sealing.

GLUMA Bond5 was developed for your comfort – in handling, performance and storage. It forms a homogeneous hybrid layer for safe sealing and high bond strength, especially on enamel. No shaking is needed before the application. GLUMA Bond5 can be stored at room temperature and is usable directly out of the bottle, without preparation time.

COMPOSITION:

  • Methacrylate
  • Ethanol
  • Fillers
  • Photoinitiators
  • Glutaraldehyde

INDICATIONS:

  • Adhesive fixing of direct composites, Polyglas® and compomer restorations.
  • Adhesive fixing of indirect laboratory-fabricated ceramic, Polyglas® and composite restorations (inlays, onlays, veneers and crowns).
Features
  • Easy and safe handling and excellent performance
  • Only one layer for priming and bonding
  • High shear bond strength
  • Superior taking without dripping
Key Specifications
  • Mean Shear Bond Strength is 45-50 MPa
Directions to use

Application

1. Adhesive fixing of direct composite, Polyglas® and compomer restorations

1.1 Preparation

  • The use of a rubber dam is recommended
  • Clean tooth with a toothpaste free from oil and fluoride
  • Prepare cavity as specifi ed by the rules of adhesive fi lling treatment
  • Rinse prepared site with water and air-dry
  • For deep cavities, we recommend protecting the dentine near the pulp with an appropriate base filling (e.g. calcium hydroxide preparation and glass ionomer cement base filling). Cover the dentine near the pulp only. Leave the remainder of the cavity free for adhesion of GLUMA Bond 5.

Conditioning

Prior to application of GLUMA Bond 5 to the cavity preparation, pre-treatment of the tooth structure with an adequate etching gel is mandatory (e.g. Gluma Etch 35 Gel by Kulzer).

Application of GLUMA Bond 5

  • Place GLUMA Bond 5 in a Dappen glass, pick it up with an applicator tip or a soft disposable brush and apply it generously to the complete surface of the cavity.
  • Allow GLUMA Bond 5 to set for 15 seconds. • GLUMA® Bond 5 contains ethanol as a solvent.
  • Carefully evaporate solvent and residual moisture under a gentle air stream until no movement of liquid can be detected.
  • The surface must be visibly shiny after application of GLUMA Bond 5 and after evaporation of the solvent. Make certain that the complete surface of the cavity is fully covered. If the cavity does not appear to be completely shiny all over, apply GLUMA® Bond 5 a second time as described above. Make sure that no excess remains in corners of the cavity

packaging
4ml bond
Additional Information

Additional Information

Dispatch Date Next Day
Expiry Date No
COD Yes
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Modern Ortho Micro Screws Titanium (TAD)
modern ortho micro screws titanium (tad)
Micro Screws Titanium (TAD)
  • Starting at: Rs.660.00

Sold Out

Gdc Carver Diamond Shape - 1 - Large (Cvfr2/3)
gdc carver diamond shape - 1 - large (cvfr2/3)
Carver
  • Rs.374.00

    Rs.231.00

    38.2% off
Gc Everstick Post
gc everstick post
Glass Fibre Post
  • Starting at: Rs.7,205.00

    6.7% off

Sold Out

Top Dent Slim Distal End Cutter Tc
top dent slim distal end cutter tc
Distal End Cutter
  • Rs.3,088.00
Gc Plastic Syringe, Pkg Of 2
gc plastic syringe, pkg of 2
Syringe
  • Rs.2,649.00

    Rs.2,596.00

    2% off

Sold Out

Dentist Table Top Art Model
dentist table top art model
Dental artwork for dentist office.
  • Rs.2,613.00

    Rs.1,782.00

    31.8% off

Sold Out

Kerr Apex Id Apex Locator
kerr apex id apex locator
Dental Apex Locator
  • Rs.51,840.00

    Rs.34,995.00

    32.5% off
Gdc Scissors Spencer For Suture Cutting (9cm) (S13s)
gdc scissors spencer for suture cutting (9cm) (s13...
Surgical Scissors
  • Rs.680.00

    Rs.383.00

    43.7% off
Detax Monoprint Supra
detax monoprint supra
VPS Transfer Silicone Monophase
  • Rs.3,504.00

    Rs.3,195.00

    8.8% off

Sold Out

Detax Detaseal Hydroflow Putty
detax detaseal hydroflow putty
Hydroflow impression silicone
  • Rs.3,450.00

    Rs.2,995.00

    13.2% off

Sold Out

Recently Viewed Products