Kulzer Meliodent ECO Universal Pack

Kulzer Meliodent ECO Universal Pack

Heraeus Kulzer

Availability: Sold out

Heat Cure
New Rs. 975

Rs.1,200.00

Rs.975.00

Description

Details

The MELIODENT ECO POWDERis a high quality denture base material imported from Germany.

COMPOSITION:

Heat curing polymer

  • Powder (polymethylmethacrylate)
  • Liquid (methylmethacrylate, dimetha crylate)

 

The MELIODENT ECO POWDERis a high quality denture base material imported from Germany.

COMPOSITION:

Heat curing polymer

  • Powder (polymethylmethacrylate)
  • Liquid (methylmethacrylate, dimetha crylate)

 

Features
  • Meliodent Heat Cure is free from cadmium. The surface of the denture has perfect properties that allows for excellent oral hygiene
  • Meliodent Rapid Repair, an acrylic used for repairs,with material and colour properties that suit this quality denture base material perfectly
  • Meliodent offers both 3 colours29(both heat-cured and self-cured), 43, 65(heat-cured) for laboratory to choose
  • Using Meliodent liquid to achieve higher levels of denture base.
Directions to use
  • Hard plaster is recommended for preparing the model and for embedding.
  • The recommended mixing ratio is 35 g : 14 ml (powder : liquid). Introduce the liquid to the mixing beaker, add the appropriate quantity of powder rapidly and mix for approx. 1 minute with a spatula
  • Meliodent Heat Cure reaches its packable consistency after approx. 10 minutes, the processing time is approx. 25 minutes
  • The processing time is extended or reduced depending on the ambient temperature.

Polymerisation pack and press technique

  • Place the flask in boiling water, switch the heat source off and leave for 15 mins. Then boil for 20 mins. Allow the flask to cool down slowly in the water bath after polymerization

Injection technique

Dosage and processing

  • The mixing ratio is 35 g : 14 ml (powder : liquid). Place the liquid in the mixing cup, add the specified volume of powder rapidly, stir to form a homogeneous mass for approx. 1 minute and leave to swell for approx. 7 minutes.
  • Then release the mass from the mixing cup, knead briefly by hand (wear protective gloves) and plug into the filling cylinder
  • Then release the mass from the mixing cup, knead briefly by hand (wear protective gloves) and plug into the filling cylinder. The waiting time before injection from the start of mixing at 23°C (73°F) is 9 –10 minutes. The waiting time dependS on the room temperature and mixed volume.
  • Close the filling cylinder using the cylinder cover and screw into the Palajet unit. Fasten flask using the centring wheel. After pulling the pressure unit forward as far as the stop, the rocker arm is moved upwards with the filling cylinder inserted and the denture acrylic injected into the flask with the aid of the pressure piston. Keep the flask under pressure in the Palajet unit for 15 minutes (rocker arm up).
  • To check the time, set the timer to 15 minutes.

packaging
  • 1 x 450g Powder
  • 1 x 225ml Liquid
  • 1 x 100ml Cold Mould Seal
  • 1 x Separating sheet
Additional Information

Additional Information

Dispatch Date Next Day
COD Yes
FAQs No
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Gdc Micro Surgical Rectangular Mirror - Small - 2x7mm (Mm1)
gdc micro surgical rectangular mirror - small - 2x...
Surgical Mirrors
  • Rs.1,160.00

    Rs.918.00

    20.9% off
Pulpdent Etch Rite Kit & Refills
pulpdent etch rite kit & refills
38% Phosphoric Acid Etching Gel
  • Starting at: Rs.630.00

3m Unitek Unite Primer
3m unitek unite primer
Chemical Cure Bonding Adhesive
  • Rs.3,528.00

    Rs.2,453.00

    30.5% off

Sold out

Kulzer   Charisma Classic
kulzer charisma classic
Composite
  • Starting at: Rs.1,275.00

    20.3% off
3A MEDES Bleaching and night guard sheets
3a medes bleaching and night guard sheets
Dheets for bleaching tray and night guar...
  • Starting at: Rs.1,250.00

    30.6% off
Waldent LED Air-rotor Handpiece + Waldent ECO Airotor (Get 1Free)
waldent led air-rotor handpiece + waldent eco airo...
Air-rotor Handpiece Buy 2 Waldent LED A...
  • Rs.7,000.00

Sold out

Gc Fuji 9 Gp Extra Capsules
gc fuji 9 gp extra capsules
Glass Ionomer Restorative (OFFER INSIDE)
  • Starting at: Rs.6,500.00

    15.5% off
3m Unitek Forsus Fatigue Resistant Device L-Pin Module
3m unitek forsus fatigue resistant device l-pin mo...
Fatigue Resistant Device
  • Starting at: Rs.4,949.00

    7.4% off

Sold out

Bien Air PM 1/1 Standard Handpiece
bien air pm 1/1 standard handpiece
PM 1/1 Standard Handpiece
  • Rs.30,000.00

    Rs.27,980.00

    6.7% off
Ids Denmed Cheek Retractor
ids denmed cheek retractor
Hand Equipment
  • Starting at: Rs.222.00

    16.9% off

Recently Viewed Products