Ivoclar Tetric N-Flow Bulk Fill Composite

Ivoclar Tetric N-Flow Bulk Fill Composite

Ivoclar-Vivadent

Flowable Bulk Fill
New Rs. 1250

Rs.1,962.00

Rs.1,250.00

bulk price: Rs.1,200.00
  • Buy 2 or above for Rs.1,200.00 each and save 4%
Reward points25 i These are the coins gained on 1 quantity of the product ordered. These points will transfer in to your account after successful delivery of your order. Know more




OR
Description

Details

The new flowable composite complements the mouldable Tetric N-Ceram Bulk Fill composite. In essence, Tetric N-Flow Bulk Fill is based on the composition of Tetric N-Ceram Bulk Fill. The material is applied as a bulk-fill base in Class I and Class II restorations. Just like the existing version, it can be light-cured in large increments of up to four millimetres, requiring only short light exposure times. Excellent affinity to cavity walls and self-levelling consistency round off the benefits offered by this volume replacement material. 

Aessencio technology

  • Another strength of the new composite lies in the Aessencio technology. This technology causes the translucency of the material to decrease from 28% to approx. 10% during polymerization.

Indications

  • As initial layer / first increment in Class I and II composite restorations in permanent teeth
  • Restorations in deciduous teeth (without capping layer)

Composition

The monomer matrix is composed of monomethacrylates and dimethacrylates (28 wt%). The fillers include barium glass, ytterbium trifluoride and copolymers (71 wt%). Additives, initiators, stabilizers and pigments are additional ingredients (<1.0 wt%). The total content of inorganic fillers is 68.2 wt% / 46.4 vol%. The particle size of the inorganic fillers ranges between 0.1 μm and 30 μm with a mean particle size of 5 μm.

The new flowable composite complements the mouldable Tetric N-Ceram Bulk Fill composite. In essence, Tetric N-Flow Bulk Fill is based on the composition of Tetric N-Ceram Bulk Fill. The material is applied as a bulk-fill base in Class I and Class II restorations. Just like the existing version, it can be light-cured in large increments of up to four millimetres, requiring only short light exposure times. Excellent affinity to cavity walls and self-levelling consistency round off the benefits offered by this volume replacement material. 

Aessencio technology

  • Another strength of the new composite lies in the Aessencio technology. This technology causes the translucency of the material to decrease from 28% to approx. 10% during polymerization.

Indications

  • As initial layer / first increment in Class I and II composite restorations in permanent teeth
  • Restorations in deciduous teeth (without capping layer)

Composition

The monomer matrix is composed of monomethacrylates and dimethacrylates (28 wt%). The fillers include barium glass, ytterbium trifluoride and copolymers (71 wt%). Additives, initiators, stabilizers and pigments are additional ingredients (<1.0 wt%). The total content of inorganic fillers is 68.2 wt% / 46.4 vol%. The particle size of the inorganic fillers ranges between 0.1 μm and 30 μm with a mean particle size of 5 μm.

Features
  • Time-saving due to 4 mm bulk-filling
  • More esthetic than other bulk-fill composites. Particularly in cases of discoloured tooth structure
  • Ideal in combination with Tetric N-Ceram Bulk Fill and Tetric N-Ceram
Key Specifications
  • Storage temperature: 2–28 °C
Directions to use

Application of Tetric N-Flow Bulk Fill

  • Tetric N-Flow Bulk Fill can be applied in increments of up to 4 mm thickness.
  • Tetric N-Flow Bulk Fill must be covered with a layer of methacrylate based universal or posterior composite (e.g. Tetric N-Ceram/Tetric N-Ceram Bulk Fill/IPS Empress Direct).
  • Proximal contacts must be established by means of a matrix system. The filling material does not exert any pressure on the matrix band. The matrix band can be shaped with a suitable hand instrument (e.g. a balltype condenser) before and/or during light-curing.
  • Complete polymerization requires a sufficiently long exposure time. For the recommendations regarding exposure time and light intensity see table.
  • When using a metal matrix, additionally polymerize the composite material from the buccal or lingual/palatal aspect after removing the matrix, if no Bluephase N polymerization light is used or the light probe cannot be ideally positioned, e.g. distant to composite or diverging scattering angle.
 Unit Programm    Bluephase N   Bluephase NM   Bluephase NMC
 High Power 10 s (1200 mW/cm2 ) 15 s (800 mW/cm2 ) 15 s (800 mW/cm2 )
 Soft Start 15 s ------ ------
 Low Power 20 s (600 mW/cm2 ) ------ ------

 

Light intensity Exposure time
 ≥ 500 mW/cm2 20 s
 ≥ 1‘000 mW/cm2 10 s

packaging
  • 1 x 2gm syringe
Additional Information

Additional Information

Dispatch Date Next Day
Expiry Date No
COD Yes
Reviews

Customer Reviews 1 item(s)

time saving

Tetric N flow bulk fill composite is time saving composite due to 4 mm bulk-filling...as I have use it several times.
It is more esthetic than other bulk-fill composites... i ll continue using it whereas recommend to others too..

Related Products

There are no products matching the selection.

You may also be interested in

Ivoclar Tetric N-Flow
ivoclar tetric n-flow
Flowable Composite
  • Starting at: Rs.850.00

    42.2% off
Gc G-Bond Refill
gc g-bond refill
Light-Cured Adhesive
  • Rs.3,657.00

Sold Out

Sun Medical Secure Starter Kit
sun medical secure starter kit
Dual-Cure Resin Cement
  • Rs.5,500.00

    Rs.4,500.00

    18.2% off

Sold Out

Medicept Dental Hydrocal LC (calcium hydroxide + barium sulphate LC)
medicept dental hydrocal lc (calcium hydroxide + b...
Light Cure Calcium Hydroxide Cavity Line...
  • Rs.1,000.00

    Rs.972.00

    2.8% off

Sold Out

Kulzer Gluma Etchant 35% Gel 1 x 2.5 ml
kulzer gluma etchant 35% gel 1 x 2.5 ml
Etchant
  • Rs.650.00

    Rs.250.00

    61.5% off

Sold Out

Gdc Extraction Forceps Pedo Set Of 7 In Pouch Premium (EFPPP7)
gdc extraction forceps pedo set of 7 in pouch prem...
Extraction Forceps
  • Rs.15,400.00

    Rs.8,663.00

    43.7% off
Prime Dental Composite Kit
prime dental composite kit
Resin Hybrid Composite
  • Rs.3,700.00

    Rs.2,295.00

    bulk price: Rs.2,285.00
    38% off

Sold Out

Bien Air CA 1/5 L Micro Series Handpiece
bien air ca 1/5 l micro series handpiece
CA 1/5 L Contrangle Handpiece
  • Rs.63,360.00

    Rs.59,050.00

    6.8% off
API Ni - Ti K -File 25mm
api ni - ti k -file 25mm
K-File
  • Starting at: Rs.200.00

    37.5% off

Sold Out

Sun Medical V-Primer
sun medical v-primer
Bonding Agent
  • Rs.3,000.00

    Rs.2,500.00

    16.7% off

Sold Out

Recently Viewed Products