Pulpdent Porcelain Etch Gel 4.8ml

Pulpdent Porcelain Etch Gel 4.8ml

Pulpdent

Availability: Sold out

9.6% Hydrofluoric Acid Porcelain Etch Gel
New Rs. 3520

Rs.4,000.00

Rs.3,520.00

Description

Details

  • Porcelain Etch Gel is a one minute application etching gel on crowns, veneers, inlays and fractured surfaces prior to bonding.
  • This superior quality porcelain gel will not stain ceramic or composites.
  • Porcelain Etch Gel is a one minute application etching gel on crowns, veneers, inlays and fractured surfaces prior to bonding.
  • This superior quality porcelain gel will not stain ceramic or composites.
Features
  • Does not stain ceramic or composites
  • One-minute etch
  • Thixotropic – stays where placed
  • Buffered formula
  • Washes off easily
Directions to use

1. Protective eyewear must be worn by practitioner, assistant and patient. Protective gloves must be worn by practitioner and assistant.

2. Place rubber dam to isolate operative site and protect soft tissue.

3. Assistant must stand ready at chairside and hold vacuum tip 2-3 inches from porcelain surface during the etching process to evacuate acid fumes.

4. Securely attach 25-gauge luer lock applicator tip to syringe. Carefully start the flow of Porcelain Etch Gel on a pad and immediately dispose of this sample. Do not start          flow in patient’s mouth. For maximum control of flow, do not push on plunger with thumb. It is recommended instead to hold syringe barrel between thumb and forefinger        while resting plunger in palm of hand. Gently pull back with thumb and forefinger to start flow. Use a new dispenser needle for each patient.

5. Carefully apply Porcelain Etch Gel to porcelain surface and leave for one minute while evacuating fumes with vacuum. For lithium disilicate restorations, etch for 10-15            seconds. Some ceramic materials are resistant to etching. To achieve a surface suitable for bonding to these materials, air abrasion is recommended. Creating                        mechanical retention is advantageous. Cap syringe immediately after use.

6. Rinse surface with copious amounts of water and dry porcelain surface with clean uncontaminated air.

7. If using EmbraceTM First-CoatTM, follow instructions for use for First-CoatTM or the EmbraceTM Restoration and PFM Repair Kit. If using Pulpdent Silane Bond                    Enhancer, follow instructions for use for silane.

8. Proceed with repairs of fractured porcelain teeth or with cementation of porcelain crowns, veneers or inlays.


packaging
  • 1 x 4.8ml Syringe
Additional Information

Additional Information

Dispatch Date Next Day
COD Yes
FAQs N/A
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Visa Explorer
visa explorer
Explorer
  • Rs.100.00

    Rs.70.00

    30% off

Sold out

Gdc Edentulous Non-Perforated Impression Trays Lower # 1 (Itrlednpl1)
gdc edentulous non-perforated impression trays low...
ImpressionTrays
  • Rs.320.00

    Rs.270.00

    15.6% off
Sk Dent Sk9000 Dental Chair
sk dent sk9000 dental chair
Dental Chair
  • Rs.112,864.00
Voco Amaris Gingiva - Set & Refill
voco amaris gingiva - set & refill
Gingival Colored Composite
  • Starting at: Rs.5,084.00

    12.7% off

Sold out

Ultradent Opalescence Boost Pf 40% 2pk Refill (4753)

Sold out

Shree Band Cutting Scissors With TC Tip - SHP35

Sold out

Hu-Friedy Rubber Dam Forceps
hu-friedy rubber dam forceps
17 cm (6 1/2") Rubber Dam Clamp Forc...
  • Rs.9,876.00

Sold out

Hu-Friedy 12r Elevator
hu-friedy 12r elevator
Used to loosen the tooth from the period...
  • Rs.4,951.00

Sold out

Strauss FG Diamond Burs Surgical Length Round 012 6/pk - A1L

Sold out

Recently Viewed Products