Pulpdent Porcelain Etch Gel Kit

Pulpdent Porcelain Etch Gel Kit

Pulpdent

Availability: Sold out

9.6% Hydrofluoric Acid Porcelain Etch Gel
New Rs. 3310

Rs.3,600.00

Rs.3,310.00

Description

Details

  • A one-minute application etches porcelain crowns, veneers, inlays and fractured porcelain surfaces prior to bonding.
  • This superior quality porcelain etch gel will not stain porcelain, composites or resin cements. 
  • A one-minute application etches porcelain crowns, veneers, inlays and fractured porcelain surfaces prior to bonding.
  • This superior quality porcelain etch gel will not stain porcelain, composites or resin cements. 
Directions to use

1. Protective eyewear must be worn by practitioner, assistant and patient. Protective gloves must be worn by practitioner and assistant.

2. Place rubber dam to isolate operative site and protect soft tissue.

3. Assistant must stand ready at chairside and hold vacuum tip 2-3 inches from porcelain surface during the etching process to evacuate acid fumes.

4. Securely attach 25-gauge luer lock applicator tip to syringe. Carefully start the flow of Porcelain Etch Gel on a pad and immediately dispose of this sample. Do not start          flow in patient’s mouth. For maximum control of flow, do not push on plunger with thumb. It is recommended instead to hold syringe barrel between thumb and forefinger        while resting plunger in palm of hand. Gently pull back with thumb and forefinger to start flow. Use a new dispenser needle for each patient.

5. Carefully apply Porcelain Etch Gel to porcelain surface and leave for one minute while evacuating fumes with vacuum. For lithium disilicate restorations, etch for 10-15            seconds. Some ceramic materials are resistant to etching. To achieve a surface suitable for bonding to these materials, air abrasion is recommended. Creating                        mechanical retention is advantageous. Cap syringe immediately after use.

6. Rinse surface with copious amounts of water and dry porcelain surface with clean uncontaminated air.

7. If using EmbraceTM First-CoatTM, follow instructions for use for First-CoatTM or the EmbraceTM Restoration and PFM Repair Kit. If using Pulpdent Silane Bond                    Enhancer, follow instructions for use for silane.

8. Proceed with repairs of fractured porcelain teeth or with cementation of porcelain crowns, veneers or inlays.


packaging
  • 4 x 1.2 mL syringes gel + 8 applicator tips
Additional Information

Additional Information

Dispatch Date Next Day
COD Yes
FAQs N/A
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Hu-Friedy Gauze Packer
hu-friedy gauze packer
Used to pack gauze at the restoration si...
  • Rs.4,698.00

Sold out

Onspot Nitrile Examination Gloves Powder Free
onspot nitrile examination gloves powder free
Packaging:100 Gloves/Box AVAILABLE IN - ...
  • Rs.345.00

    Rs.300.00

    13% off
D-Tech Iono-Set Universal Gic Liquid
d-tech iono-set universal gic liquid
Glass Inomer Universal Liquid for Type I...
  • Rs.350.00

Sold out

Navadha Heidemann Separating Spatulas - D / E (025-349) - Fig 3
navadha heidemann separating spatulas - d / e (025...
Heidemann Separating Spatulas
  • Rs.180.00

    Rs.175.00

    2.8% off
Pyrax Ivory Wax
pyrax ivory wax
Ivory Wax
  • Rs.186.00

    Rs.95.00

    48.9% off
Gdc Single End Probe -1 (Exs6xl)
gdc single end probe -1 (exs6xl)
DiagnosticProbes
  • Rs.187.00

    Rs.154.00

    17.6% off
Gdc Periosteal Elevator P8d - 6 (P8d)
gdc periosteal elevator p8d - 6 (p8d)
Surgical Elevator
  • Rs.1,848.00

    Rs.1,485.00

    19.6% off
Ribbond Ribbon Fiber Splint Kit
ribbond ribbon fiber splint kit
Fiber Splint
  • Rs.26,000.00

    Rs.19,500.00

    25% off

Recently Viewed Products