Scheu Duran + Clear 125mm 100/pk

Scheu Duran + Clear 125mm 100/pk

Scheu-Dental

Availability: In stock

Hard - Elastic, Transparent Material with Integrated Insulation Foil,
New 7500.00

Starting at: Rs.7,500.00

Bulk prices available. For customized prices - click here

Scheu Duran + Clear 0.5 x 125 mm - 3426
Rs.7,500.00
Scheu Duran + Clear 0.625 x 125 mm - 3428
Rs.10,000.00
Scheu Duran + Clear 0.75 x 125 mm - 3430
Rs.11,000.00
Scheu Duran + Clear 1.0 x 125 mm - 3432
Rs.11,500.00

Check COD
  • Enter pincode to check whether Cash On Delivery is available.
  • Delivery available at all pincodes.
  • Generally delivered in 4 - 5 working days.
  • Free Shipping Above ₹2500.
  • COD Not available for Order Above ₹20000 or Above 10Kg.
OR
Description

Details

DURAN +Hard-elastic, transparent material with integrated insulation foil, bonds to acrylic. No pre-drying.Properties: DURAN + is a clear transparent PET-G thermoplastic. The Material is abrasion resistant to the greatest possible extent and almost unbreakeable with excellent  properties concerning breaking resistance, elasticity and from stability. DURAN + belongs to the polyester group and is therefore not hygroscopic reactive (no predrying necessary ).The material is highgly blocompatible. Our presure moulding foils have been cell-biological tested acc.to the international Guidelines ISO 10993 and EN ISO 7405 with the result that they have been released for clinical use. Application: DURAN + is well suited for all prosthetic and orthodontic splint therapies such as miniplast splints,bruxism splints with and without adjustment as well as palatal expansion.This hard-elastic soilint material is best suited for tooth transposition, correction and retentions in the splint therapy.  Miniplast splints, occlusal splints, CMD splints, Interim and fl uorisation splints, drilling/x-ray templates, antisnoringappliances, invisible retainer.Pressurizing: DURAN + is supplied with a thin insulating foil in order to gurarantee hightest tranparency and an aesthetic easy-to-clean inner side of theplate. The foil can be easily removed after pressure moulding. As a rule, the model should be embedded in the pellets. as you can see from the imprint on th foils or the labels, the heating times for DURAN+ are extremely short.When DURAN + is moulded on an average sized model optimally embedded, the strength of the material is reduced by up to 25 %. Finishing: Up to a thickness of  1.0 mm, DURAN + can be easily trimmed with foil scissors. For all other thiknesse,we recommend the finishing set(REF 3378 ). Final trimming and polishing can be most effectively done with DIMO/DIMO PRO abrasives (REF 3380-3384/3376). Compound and adjustment with cold cure resins (f.ex. DURASPLINT) is possiblewithout any problems. For some C+B respectively temporary material - especially bis-acrylic composite - corresponding bounding agents are necessary.Material care: We recommend cleaning with our SCHEU-DENTAL CETRON products, please don't use alcoholic cleansing agents on vegetable basis (f.ex.pyralvex), hot water or steam blasting. DURAN +Hard-elastic, transparent material with integrated insulation foil, bonds to acrylic. No pre-drying.Properties: DURAN + is a clear transparent PET-G thermoplastic. The Material is abrasion resistant to the greatest possible extent and almost unbreakeable with excellent  properties concerning breaking resistance, elasticity and from stability. DURAN + belongs to the polyester group and is therefore not hygroscopic reactive (no predrying necessary ).The material is highgly blocompatible. Our presure moulding foils have been cell-biological tested acc.to the international Guidelines ISO 10993 and EN ISO 7405 with the result that they have been released for clinical use. Application: DURAN + is well suited for all prosthetic and orthodontic splint therapies such as miniplast splints,bruxism splints with and without adjustment as well as palatal expansion.This hard-elastic soilint material is best suited for tooth transposition, correction and retentions in the splint therapy.  Miniplast splints, occlusal splints, CMD splints, Interim and fl uorisation splints, drilling/x-ray templates, antisnoringappliances, invisible retainer.Pressurizing: DURAN + is supplied with a thin insulating foil in order to gurarantee hightest tranparency and an aesthetic easy-to-clean inner side of theplate. The foil can be easily removed after pressure moulding. As a rule, the model should be embedded in the pellets. as you can see from the imprint on th foils or the labels, the heating times for DURAN+ are extremely short.When DURAN + is moulded on an average sized model optimally embedded, the strength of the material is reduced by up to 25 %. Finishing: Up to a thickness of  1.0 mm, DURAN + can be easily trimmed with foil scissors. For all other thiknesse,we recommend the finishing set(REF 3378 ). Final trimming and polishing can be most effectively done with DIMO/DIMO PRO abrasives (REF 3380-3384/3376). Compound and adjustment with cold cure resins (f.ex. DURASPLINT) is possiblewithout any problems. For some C+B respectively temporary material - especially bis-acrylic composite - corresponding bounding agents are necessary.Material care: We recommend cleaning with our SCHEU-DENTAL CETRON products, please don't use alcoholic cleansing agents on vegetable basis (f.ex.pyralvex), hot water or steam blasting.
Reviews

Hot Selling Products

Related Products

There are no products matching the selection.


Recently Viewed Products