Ultradent Ultraseal Xt Plus Kit & Refills

Ultradent Ultraseal Xt Plus Kit & Refills

Ultradent

Availability: Sold out

Pit & Fissure Sealant
New Rs. 1663

Starting at: Rs.1,663.00

Ultradent UltraSeal XT Plus Clear Refill 1 Pack

Rs.2,008.00

Rs.2,000.00

Ultradent UltraSeal XT Plus Clear Refill 4 Pack

Rs.7,306.00

Rs.7,128.00

Ultradent UltraSeal XT Plus Opaque White Refill 1 Pack

Rs.1,746.00

Rs.1,663.00

Ultradent UltraSeal XT Plus Opaque White Econo Refill 20 Pack

Rs.31,750.00

Rs.31,066.00

Ultradent UltraSeal XT Plus Clear Kit

Rs.6,431.00

Rs.6,295.00

Description

Details

UltraSeal XT plus:

What children want: Do it fast! What their parents want: Make it last! UltraSeal XT plus helps you achieve both – thanks to convenient syringe delivery and optimum material composition with a high filler content.

Ideal viscosity: Ultra Seal XT plus is flowable when applied with the Inspiral Brush Tip, but stays after it has been placed. In contrast to ordinary cannulae, the brush tip can be used to work the sealant into the fissures, avoiding the formation of air bubbles.The 58% fill provides enhanced stability and wearability. As a preparatory step, use PrimaDry (see on the right), as it removes any residual moisture from the fissures and allows ideal penetration of UltraSeal XT plus.

UltraSeal XT plus is a light-cured, radiopaque, fluoride-releasing composite sealant. It is stronger and more wear resistant because it is a 58%-filled resin and has less polymerization shrinkage than competitive products. The spiral brush action of the Inspiral® Brush tip causes shear thinning of the filled, thixotropic UltraSeal XT plus, reducing its viscosity as it is placed. The resin firms when shear thinning ceases and placement is complete, preventing it from running before it can be light cured. Using PrimaDry with UltraSeal XT plus enhances UltraSeal XT plus’s penetration into pits and fissures1 by eliminating moisture that can cause failure.

INDICATIONS

  • Use UltraSeal XT plus for prophylactic sealing of pits and fissures.
  • It may also be used for microrestorative or as an “initial layer” of composite restorations.

ADVANTAGES:

BPA Free

  • Ultradent has always been aware of the risk associated with BPA and has never used it in our dental sealants.

Revolutionary Delivery

  • The easiest and most efficient way to ensure UltraSeal XT plus is delivered deep into pits and fissures is to use the Inspiral Brush tip. The unique helical channel of the tip thins the viscous material, and the fine brush fibers help guide the resin directly where you want it to go.

Optimal Viscosity

  • UltraSeal XT plus flows easily into the tiniest pits and fissures, but doesn’t run after placement.

Fluoride Releasing

  • UltraSeal XT plus releases fluoride to the tooth to promote healthy enamel.

 

PACKAGING:

  • Ultradent UltraSeal XT Plus Clear Refill 1 Pack :- 1 x 1.2ml Clear syringe
  • Ultradent UltraSeal XT Plus Clear Refill 4 Pack :- 4 x 1.2ml Clear syringes
  • Ultradent UltraSeal XT Plus Opaque White Refill 1 Pack :- 1 x 1.2ml Opaque White syringe
  • Ultradent UltraSeal XT Plus Opaque White Econo Refill 20 Pack :- 20 x 1.2ml Opaque White syringes
  • Ultradent UltraSeal XT Plus Clear Kit :- 1 x 1.2ml Clear syringe 

UltraSeal XT plus:

What children want: Do it fast! What their parents want: Make it last! UltraSeal XT plus helps you achieve both – thanks to convenient syringe delivery and optimum material composition with a high filler content.

Ideal viscosity: Ultra Seal XT plus is flowable when applied with the Inspiral Brush Tip, but stays after it has been placed. In contrast to ordinary cannulae, the brush tip can be used to work the sealant into the fissures, avoiding the formation of air bubbles.The 58% fill provides enhanced stability and wearability. As a preparatory step, use PrimaDry (see on the right), as it removes any residual moisture from the fissures and allows ideal penetration of UltraSeal XT plus.

UltraSeal XT plus is a light-cured, radiopaque, fluoride-releasing composite sealant. It is stronger and more wear resistant because it is a 58%-filled resin and has less polymerization shrinkage than competitive products. The spiral brush action of the Inspiral® Brush tip causes shear thinning of the filled, thixotropic UltraSeal XT plus, reducing its viscosity as it is placed. The resin firms when shear thinning ceases and placement is complete, preventing it from running before it can be light cured. Using PrimaDry with UltraSeal XT plus enhances UltraSeal XT plus’s penetration into pits and fissures1 by eliminating moisture that can cause failure.

INDICATIONS

  • Use UltraSeal XT plus for prophylactic sealing of pits and fissures.
  • It may also be used for microrestorative or as an “initial layer” of composite restorations.

ADVANTAGES:

BPA Free

  • Ultradent has always been aware of the risk associated with BPA and has never used it in our dental sealants.

Revolutionary Delivery

  • The easiest and most efficient way to ensure UltraSeal XT plus is delivered deep into pits and fissures is to use the Inspiral Brush tip. The unique helical channel of the tip thins the viscous material, and the fine brush fibers help guide the resin directly where you want it to go.

Optimal Viscosity

  • UltraSeal XT plus flows easily into the tiniest pits and fissures, but doesn’t run after placement.

Fluoride Releasing

  • UltraSeal XT plus releases fluoride to the tooth to promote healthy enamel.

 

PACKAGING:

  • Ultradent UltraSeal XT Plus Clear Refill 1 Pack :- 1 x 1.2ml Clear syringe
  • Ultradent UltraSeal XT Plus Clear Refill 4 Pack :- 4 x 1.2ml Clear syringes
  • Ultradent UltraSeal XT Plus Opaque White Refill 1 Pack :- 1 x 1.2ml Opaque White syringe
  • Ultradent UltraSeal XT Plus Opaque White Econo Refill 20 Pack :- 20 x 1.2ml Opaque White syringes
  • Ultradent UltraSeal XT Plus Clear Kit :- 1 x 1.2ml Clear syringe 
Features
  • High retention rate
  • Direct delivery into difficult-to-access areas
  • Bubble-free, drip-free placement
  • Effective at preventing microleakage
  • Penetrates deepest pits and fissures
  • Rapid and safe seal for pits and fissures
  • Strong and wear-resistant
  • Thixotropic – flows into pits and fissures; doesn’t run after placement
  • Radiopaque and fluoride releasing
Directions to use

INSTRUCTIONS:

STEP 1:

Etch with Ultra-Etch for 20 seconds; rinse. Shown with Inspiral Brush tip but can also be used with Blue Micro tip.

STEP 2:

Air dry and apply PrimaDry (Shown with Black Micro® FX® tip.)

STEP 3:

Apply UltraSeal XT plus.\

STEP 4:

Light cure the restoration


packaging
  • Ultradent UltraSeal XT Plus Clear Refill 1 Pack :- 1 x 1.2ml Clear syringe
  • Ultradent UltraSeal XT Plus Clear Refill 4 Pack :- 4 x 1.2ml Clear syringes
  • Ultradent UltraSeal XT Plus Opaque White Refill 1 Pack:-1 x 1.2ml
Additional Information

Additional Information

Dispatch Date Next Day
COD Yes
FAQs

Is UltraSeal XT plus different from other tooth sealants?

  • Yes! UltraSeal XT plus has been the leader in sealants since 1998. It has an excellent retention rate and has always been BPA FREE.

Is UltraSeal XT plus BPA free?

  • Yes. Ultradent has always been concerned with the potential harmful effects of BPA, and as such has never used Bisphenol A in the production of UltraSeal XT plus or UltraSeal XT hydro sealants.

Can UltraSeal XT plus Opaque White shade be used as an opaquer?

  • Ideally UltraSeal XT plus should not be used as an opaquer. Instead, use PermaFlo® dentin opaquer for this purpose.

What is UltraSeal’s diameter of filler in micrometers, weight percentage, and density?

  • The average particle size is 1.5 microns, the sealant is 58% filled by weight, and is 1.73g/ml

Can UltraSeal XT plus be used to splint two teeth together?

  • When performing periodontal splinting, it is wise to consider a reinforced restoration such as Ribbond or GlasSpan in conjunction with the restorative material. When either of these products is used, UltraSeal XT plus can be used as the restorative material. Flow characteristics may be addressed with a more viscous material such as PermaFlo, which is a 68%-filled resin

Is it true that Sealants for Smiles uses UltraSeal XT plus?

  • Yes. Sealants for Smiles is a nonprofit organization that provides oral health education and tooth sealants to children in lower-income schools. Nonprofit organizations are subject to more stringent standards on the type and quality of materials used in their programs. One of the reasons Sealants for Smiles opted to use UltraSeal XT plus was because of its long-standing reputation in the dental field.
Reviews

Related Products

There are no products matching the selection.

You may also be interested in

Gdc Weingart (Tc) (3000/31tc)
gdc weingart (tc) (3000/31tc)
OrthodonticInstrument
  • Rs.2,948.00

    Rs.2,360.00

    19.9% off
Gdc Endo Box With 72 Holes (Aeb)
gdc endo box with 72 holes (aeb)
Endo Box
  • Rs.1,232.00

    Rs.1,063.00

    13.7% off
Hu-Friedy 94 Root Tip Pick
hu-friedy 94 root tip pick
Delicate instruments for the removal of ...
  • Rs.4,352.00

Sold out

Gdc Osteotome Chisel - Straight (7.5mm) (Oss6520s)
gdc osteotome chisel - straight (7.5mm) (oss6520s)
Surgical Chisel
  • Rs.1,738.00

    Rs.1,366.00

    21.4% off
Dentsply Waveone Gold Rotary Files Refill
dentsply waveone gold rotary files refill
Reciprocating Files
  • Starting at: Rs.3,700.00

    7.5% off
Ultradent Prophy Paste(Pure)
ultradent prophy paste(pure)
Ultrapro Tx prophy paste features a spla...
  • Rs.3,456.00
Gdc Band Pusher (4870)
gdc band pusher (4870)
OrthodonticInstrument
  • Rs.770.00

    Rs.594.00

    22.9% off
Ss White Carbide Burs Great White / Gw Series
ss white carbide burs great white / gw series
Carbide Bur
  • Starting at: Rs.326.00

    40.7% off
Gdc Retractors Flexible Con Molla (Trcm3)
gdc retractors flexible con molla (trcm3)
Tissue Retractor
  • Rs.924.00

    Rs.713.00

    22.8% off
Hu-Friedy 15/16 Gracey Curette
hu-friedy 15/16 gracey curette
Area-specific to allow for deep scaling,...
  • Rs.1,771.00

Sold out

Recently Viewed Products