Implantology

Implant Drills and Ridge Augmentation Instruments

Implant drills are purpose-designed burs that create the osteotomy site at controlled depth and diameter matching the chosen fixture. Drill stoppers prevent over-preparation in sites with limited bone height. Ridge augmentation instruments — osteotomes, bone condensers, sinus lift instruments, and membrane placers — manage bone volume and quality before or during fixture placement. Impact Surgical Drills With Stoppers Kit (Hex/Conical) and ridge augmentation instruments including osteotomes and sinus lift sets are available on Dentalkart.

Bone Grafts and Barrier Membranes

Bone graft materials restore alveolar bone volume for ridge preservation, socket augmentation, or guided bone regeneration prior to or simultaneous with implant placement. Xenografts (bovine-derived), synthetic alloplasts (HA/beta-TCP), and combination grafts provide osteoconductive scaffolds. Resorbable collagen membranes contain the graft and exclude non-osteogenic tissue during healing. Xcem Osspore Collagen Membranes and MCTBIO Bone Tac Master Mini Kit are stocked on Dentalkart.

Implant Prosthetics

Implant prosthetic components connect the implant fixture to the definitive crown, bridge, or denture. Healing abutments shape the peri-implant soft tissue during the osseointegration period. Impression copings transfer the three-dimensional implant position to the working cast. Xcem Healing Abutments in multiple collar heights, MS Implants Healing Abutment, and impression copings for major implant systems are available on Dentalkart.

Sutures and Implant Luting Cements

Sutures close mucoperiosteal flaps after implant surgery. Resorbable chromic gut and polyglycolic acid sutures resorb within 7 to 21 days; non-resorbable monofilament nylon requires removal at 7 to 10 days. Implant luting cements secure cement-retained crowns to abutments — temporary luting cements allow retrieval for maintenance; permanent resin cements suit definitive cementation. All Meds, Ethicon, and Lifeline sutures, and Prime Dental Templute Temporary Luting Cement and DPI Resinocem DC Dual Cure Luting Cement are stocked on Dentalkart.

When Are Implantology Products Used

Implantology products are used across the full implant treatment sequence — from initial site assessment and bone augmentation through fixture placement, osseointegration, and final prosthetic restoration — and in maintenance and retreatment of existing implants.

• Ridge preservation using bone graft and collagen membrane immediately after extraction to maintain bone volume for future implant placement
• Sinus lift augmentation using osteotomes or lateral window technique before posterior maxillary fixture placement in resorbed ridges
• Implant osteotomy preparation and fixture placement using system-specific surgical drill sequences and torque wrenches
• Healing abutment connection at second-stage surgery to shape peri-implant soft tissue emergence profile
• Impression coping placement for open-tray or closed-tray implant-level impressions before crown fabrication
• Implant crown cementation using temporary luting cement for retrievable restorations or permanent resin cement for definitive cases
• Suturing of mucoperiosteal flaps after surgical placement or grafting procedures
• Implant maintenance — peri-implant scaling using titanium-tipped instruments to avoid implant surface damage

How to Choose the Right Implantology Products

• Implant connection type — internal hex versus conical — Internal hex systems such as Impact DSI are well-suited for multi-unit prosthetics and full-arch cases where passive fit across multiple abutments is critical. Conical (Morse taper) systems such as Apex Konnect are preferred for single posterior and anterior esthetic cases where minimal microgap formation and crestal bone preservation are the priority.
• Implant diameter selection — Narrow fixtures (3.30–3.50 mm) suit anterior sites and narrow ridges. Standard fixtures (4.00–4.20 mm) are the first choice for most premolar and molar sites. Wide fixtures (5.0 mm and above) maximise bone-to-implant contact in extraction sockets and low-density posterior maxillary bone. Diameter selection follows CBCT measurement of available ridge width.
• Bone graft material by indication — Synthetic HA/beta-TCP grafts such as Xcem Osspore Synthetic Bone Grafts HA/B-TCP are suitable for socket preservation with predictable resorption. Bovine xenograft (Xcem Osspore Bovine Bone Grafts) maintains volume longer and suits staged implant placement where maximum bone preservation between extraction and implant surgery is needed.
• Membrane selection — Resorbable collagen membranes (Xcem Osspore Collagen Membranes) suit single-tooth socket preservation and small ridge augmentations — no second surgery is required for removal. Non-resorbable PTFE membranes are indicated for large-volume defects requiring rigid space maintenance beyond 4 to 6 weeks.
• Surgical kit compatibility — Always match the surgical kit to the implant system being placed. System-specific drills, depth stops, and torque wrenches ensure the osteotomy matches the fixture's thread pitch and taper geometry. Using non-system drills risks mismatched site dimensions and reduced primary stability.
• Luting cement — retrievable versus definitive — Temporary luting cements such as Prime Dental Templute are preferred for cement-retained implant crowns in most cases because they allow retrieval for screw access, abutment maintenance, or crown repair. Permanent resin cements are reserved for cases where retrievability is not a clinical requirement.

Implantology Brands Available on Dentalkart

Dentalkart stocks implantology products from Apex Konnect, Impact, Xcem, GS Implants, MS Implants, Sweden & Martina, Cotisen, MCTBIO, Julldent, All Meds, Ethicon, Lifeline, Prime Dental, and DPI, among others. The range covers implant fixtures, surgical kits, drills, bone grafts, barrier membranes, implant prosthetic components, sutures, and luting cements.

Why Buy Implantology Products from Dentalkart

Dentalkart supplies 100% genuine implantology products sourced from manufacturers and authorised distributors, with a 10-day replacement policy on eligible items. Orders are delivered across 110,000+ pincodes in India with cash-on-delivery and EMI options available. A dedicated support team assists with system compatibility, diameter and length selection, and order queries for implantologists, oral surgeons, and general dental practitioners placing implants.

What are implantology products used for in dentistry?

Implantology products are used to surgically place titanium fixtures into the jawbone and restore them with crowns, bridges, or dentures to replace missing teeth. The category covers implant fixtures in multiple diameters and connection types, surgical placement kits, implant drills, bone graft materials, barrier membranes, healing abutments, impression copings, sutures, and luting cements for the full implant treatment sequence from site preparation to final prosthetic delivery.

What is the difference between bone-level and tissue-level dental implants?

Bone-level implants are placed at or slightly below the crestal bone surface — the implant-abutment interface sits at bone level, giving the clinician full prosthetic flexibility for crown design and emergence profile management. Tissue-level implants have an integrated polished collar that positions the implant-abutment interface within the soft tissue, keeping the connection away from the bone and reducing peri-implant inflammatory bone remodelling. System choice depends on site anatomy, aesthetic requirements, and the clinician's prosthetic protocol.

How do I choose between a xenograft and a synthetic bone graft for ridge preservation?

Bovine xenografts such as Xcem Osspore Bovine Bone Grafts resorb slowly and maintain ridge volume for longer — preferred when staged implant placement is planned 4 to 6 months after extraction. Synthetic HA/beta-TCP grafts such as Xcem Osspore Synthetic Bone Grafts HA/B-TCP resorb faster, stimulating new bone formation at a quicker rate — suited for shorter implant placement timelines or when the site has adequate native bone for primary stability.

When should temporary luting cement be used instead of permanent cement for implant crowns?

Temporary luting cement is preferred for most cement-retained implant crowns because it allows the crown to be retrieved for screw access, abutment tightening, or crown repair without destroying the restoration. Prime Dental Templute, designed specifically for implant use, provides adequate retention for normal function while remaining removable by the clinician. Permanent resin cement is reserved for cases where the restorative design makes retrievability unimportant and the abutment screw access is confirmed to be permanently blocked.

Are implantology products on Dentalkart genuine and sourced from authorised channels?

Implantology products on Dentalkart are genuine and procured from manufacturers and authorised distributors. Brands including Apex Konnect, Impact, Xcem, GS Implants, and Sweden & Martina are supplied in original manufacturer packaging through verified supply chains. Dentalkart offers a 10-day replacement policy on eligible implantology products for quality or fulfilment issues.