Gc Flexceed Putty And Kit

Gc Flexceed Putty And Kit

GC

Availability: In stock

Rubber Base Impression Material
New Rs. 995

Starting at: Rs.995.00

Gc Flexceed Putty
  • Buy 2 or above for Rs.2,340.00 each and save 1%
  • Buy 5 or above for Rs.2,295.00 each and save 3%

Rs.4,752.00

Rs.2,350.00

bulk price: Rs.2,295.00
Gc Flexceed Putty + Light Body Kit
  • Buy 2 or above for Rs.3,400.00 each and save 3%
  • Buy 5 or above for Rs.3,350.00 each and save 5%

Rs.5,995.00

Rs.3,500.00

bulk price: Rs.3,350.00
Gc Flexceed Light Body refill
  • Buy 2 or above for Rs.950.00 each and save 5%
  • Buy 5 or above for Rs.900.00 each and save 10%

Rs.1,900.00

Rs.995.00

bulk price: Rs.900.00

OR
Description

Details

Vinyl polysiloxane impression material

FLEXCEED, with its lowest contact angle, displaces moisture and lows into subgingival areas rather than lowing away to mucosal surfaces, thus producing accurate impression detail.

It has  High Initial Hydrophilicity & Viscosity . It  gets pushed into the sub-gingival area  easily to register  the details. The flow of FLEXCEED Putty-Wash is better than most of the brands.

FLEXCEED LIGHT BODY is more hydrophilic:

The initial contact angle of a water droplet on an impression material helps measures the ability of a material to wet surfaces

FLEXCEED exhibits the highest tear strength to give an accurate impression detail everytime.

The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.

The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.

INDICATIONS:

  • For impressions in cases of veneers, inlay, onlay, crown or bridge

Vinyl polysiloxane impression material

FLEXCEED, with its lowest contact angle, displaces moisture and lows into subgingival areas rather than lowing away to mucosal surfaces, thus producing accurate impression detail.

It has  High Initial Hydrophilicity & Viscosity . It  gets pushed into the sub-gingival area  easily to register  the details. The flow of FLEXCEED Putty-Wash is better than most of the brands.

FLEXCEED LIGHT BODY is more hydrophilic:

The initial contact angle of a water droplet on an impression material helps measures the ability of a material to wet surfaces

FLEXCEED exhibits the highest tear strength to give an accurate impression detail everytime.

The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.

The subgingival and interproximal regions of the impression are often very thin and can tear during the removal of the impression. FLEXCEED has been tested to have the highest strength to resist tearing in comparison to other vps impression materials.

INDICATIONS:

  • For impressions in cases of veneers, inlay, onlay, crown or bridge
Features
  • Better reproduction detail with two viscosities (Putty & Light Body)
  • Exhibits pseudo-plastic properties for precision which is not found in alginates
  • Superior tear strength than any other VPS material
  • Better dimensional stability – multiple models can be poured up to two weeks
  • Good hydrophilicity
  • Compatible with gypsum products
  • Superior wetting characteristics ensuring gypsum working cast is hard with smooth surface
  • Can be subjected to cold sterilization without compromising the details and dimensional stability of the impression
Key Specifications

PHYSICAL PROPERTIES:

  LIGHT BODY PUTTY
Mixing Time   20 sec
Total Working Time 2 min 1 min
Minimum time in Mouth 3 min 3 min
Elastic recovery More than equals 98% More than equals 98%
Strain in Compression 2.5-3.5 % 1-2%
Linear dimensional change Less than or equals to 0.20% Less than or equals to 0.20%
Detail Reproduction 20 μm 75 μm
Compatibility with Gypsum 20 μm 75 μm
Directions to use

I. Single step putty wash impression

STEP 1:

Take equal quantities of FLEXCEED base & catalyst using the prescribed scoop

STEP 2:

Knead the FLEXCEED base & catalyst until a uniform blue color is achieved

STEP 3:

Load the FLEXCEED putty mix on the tray

STEP 4:

Inject the FLEXCEED light body onto the putty mix making sure that the nozzle remains immersed to prevent air entrapment

STEP 5:

Using the intra-oral tips, inject the FLEXCEED light body directly around the prepared tooth

STEP 7:

Final impression is easy to read due to the contrasting colour of FLEXCEED

II. Impression for complete denture

STEP 1:

Apply GC tray adhesive

STEP 2:

Bourder moulding using FLEXCEED putty

STEP 3:

FLEXCEED light body is loaded onto the individual tray

STEP 4:

Completed upper impression

Double step putty wash impression

STEP 1: Prepared tooth for crown

STEP 2: After applying GC tray adhesive, FLEXCEED putty Putty impression is taken is loaded on the stock tray

STEP 3: Putty impression is taken

STEP 4: Using the putty cutter, create a space for the light body

STEP 5: Inject the FLEXCEED light body around the prepared tooth, then immediately re-seat the putty tray impression

STEP 6: Final impression using FLEXCEED

Dual Arch impression

STEP 1:

FLEXCEED putty is loaded onto a dual arch tray

STEP 2:

FLEXCEED Light Body is injected over the putty Final impression. then impression is taken


packaging

GC Flexceed Putty :

  • 1 x (500g) 278ml Base
  • 1 x (500g) 278ml Catalyst

GC Flexceed Putty + Light Body Kit:

  • 1 x (500g) 278ml Base
  • 1 x (500g) 278ml Catalyst
  • 2 x 50ml Light Body
  • 8 Mixing tips
  • 8 Intra-oral tips

GC Flexceed Light Body :

  • 2 x 78gm Catridge
Expiry

Expiry date: 2020-10-29

Additional Information

Additional Information

Dispatch Date No
COD Yes
FAQs No
Reviews

Customer Reviews 1 item(s)

Good product

Vinyl polysiloxane Easy to use. Has a good amt of working time. Doesnt displace the light body in single step impression. Give a beatiful detail. I would recommend this product to others..

Related Products

Dmg Silagum Putty With Light Body Kit
dmg silagum putty with light body kit
Putty with Light Body
  • Rs.7,050.00

    Rs.3,970.00

    bulk price: Rs.3,930.00
    43.7% off
Dentsply Reprosil VPS Light BodyTube
dentsply reprosil vps light bodytube
Elastomeric Impression Material
  • Rs.2,220.00

    Rs.2,000.00

    9.9% off
Zhermack Elite Hd+ Light Body Normal Set(Cartridge)
zhermack elite hd+ light body normal set(cartridge...
Hydrophilic very low viscosity A-silicon...
  • Rs.2,600.00

    Rs.1,800.00

    30.8% off

Sold out

Novabone Dental Putty cartridge form
novabone dental putty cartridge form
Dental bone grafting material
  • Starting at: Rs.1,400.00

Prime Dental Ad-Sil Soft Putty + Light Body
prime dental ad-sil soft putty + light body
Silicone Impression Material
  • Rs.3,700.00

    Rs.3,200.00

    13.5% off
Dpi Photosil Soft Putty
dpi photosil soft putty
Soft Putty and Light Body
  • Starting at: Rs.680.00

    26.5% off
Prevest Denpro Hiflex Silky Touch Putty
prevest denpro hiflex silky touch putty
Rubber Base Impression Material
  • Starting at: Rs.1,100.00

    20% off
Gc Flexceed Putty(Buy One Get One)
gc flexceed putty(buy one get one)
Putty & Light Body
  • Rs.12,000.00

    Rs.6,480.00

    46% off

You may also be interested in

Dpi Impression Paste
dpi impression paste
Zinc Oxide Eygenol
  • Rs.555.00

    Rs.450.00

    bulk price: Rs.440.00
    18.9% off
Dentsply Aquasil Ultra Monophase
dentsply aquasil ultra monophase
.light body impression material
  • Rs.5,175.00

    Rs.4,599.00

    11.1% off
Coltene Speedex Putty Set (Condensation Silicon)
coltene speedex putty set (condensation silicon)
Rubber Base Impression Material (very lo...
  • Rs.4,200.00

    Rs.2,600.00

    bulk price: Rs.2,580.00
    38.1% off
Oro Dispensing Gun 1:1
oro dispensing gun 1:1
Automatic Mixing Unit
  • Rs.1,850.00

    Rs.1,350.00

    27% off
Zhermack Tropicalgin Alginate Powder
zhermack tropicalgin alginate powder
Alginate Impression material
  • Rs.496.00

    Rs.289.00

    bulk price: Rs.285.00
    41.7% off
Coltene Coltoprint Alginate Powder
coltene coltoprint alginate powder
Alginate Impression Material
  • Rs.306.00

    Rs.290.00

    5.2% off
Zhermack Zetaplus C Silicone Intro Kit (Base + Catalyst + Light Body)
zhermack zetaplus c silicone intro kit (base + cat...
Rubber Base Impression Material
  • Rs.2,475.00

    Rs.1,495.00

    bulk price: Rs.1,475.00
    39.6% off
Vita Classical Shade Guide
vita classical shade guide
Shade Guide (accurate tooth colour deter...
  • Rs.5,500.00

    Rs.4,350.00

    20.9% off
Visa Germany Automatic Crown Remover Standard
visa germany automatic crown remover standard
Crown Remover
  • Rs.4,752.00

    Rs.1,800.00

    62.1% off
Gdc P.K Thomas #1 (Pkt2)
gdc p.k thomas #1 (pkt2)
Carving Instrument
  • Rs.170.00

    Rs.140.00

    17.6% off

Recently Viewed Products