Temporary Crown Materials

Temporary Crown & Bridge Materials — Bis-Acrylic, Light-Cure & Pattern Resin

Temporary crown and bridge materials are bis-acrylic composite cartridges, light-cured resins, and pattern resins used to fabricate single-tooth provisional crowns, multi-unit bridges, and lab patterns that protect the prepared tooth during the 1–4 week lab fabrication of the final ceramic or PFM crown. Dentalkart stocks chairside bis-acrylic, light-cure provisional and lab pattern resin from Dentsply, Nexobio and GC.

Types of Temporary Crown Material

Bis-acrylic composite (chairside cartridge)

Self-mixing 1:1 cartridge composite that sets in 2–3 minutes, finishes like a regular composite, and gives strong, aesthetic, well-fitting single-unit or multi-unit provisionals — the modern gold standard for chairside temporisation. For example, Dentsply Integrity Temporary Crown and Bridge Material A2 or Nexobio Trantemp Bis-Acrylic.

Light-cure temporary crown material

Pre-shaded light-cure composite resin that polymerises in 40–60 seconds under a curing unit — fast workflow without cartridge waste, ideal for single-unit anterior provisionals where shade match matters. For example, Nexobio Transcen Temp C&B LC.

Pattern resin for lab-fabricated crowns

Self-cure brush-bead acrylic resin used in dental labs to build pattern copings, inlay/onlay patterns and custom abutments before investing and casting in PFM, full-cast or pressed-ceramic workflows. For example, GC Pattern Resin LS.

When Temporary Crown Material Is Used

• Chairside single-tooth provisional after crown preparation
• Multi-unit provisional bridge during lab fabrication of the final FPD
• Long-term provisional for periodontal stabilisation or aesthetic trial
• Immediate temporisation after implant placement (for screw-retained healing abutments)
• Anterior aesthetic provisional shade and form trial before final ceramic
• Lab pattern fabrication for cast posts, copings and inlay patterns (pattern resin)

How to Choose and Use Temporary Crown Material

1. Pick bis-acrylic cartridge (Dentsply Integrity, Nexobio Trantemp) for routine single and multi-unit chairside provisionals — fast set, strong, finishes well.
2. Pick light-cure (Nexobio Transcen LC) for anterior aesthetic provisionals where shade and translucency matter most.
3. Pick pattern resin (GC Pattern Resin LS) for lab-bench pattern fabrication of cast crowns and posts.
4. Use a vacuum-formed or alginate matrix from the pre-prep cast to shape the provisional accurately on the prepared tooth.
5. Cement bis-acrylic and light-cure provisionals with non-eugenol temporary cement (Tempbond NE or RelyX Temp NE) to avoid interference with the final resin cement bonding.
6. Trim, polish and check occlusion before patient dismissal — high spots cause patient discomfort and provisional fracture.

Temporary Crown Brands at Dentalkart

Dentalkart's temporary crown material range includes Dentsply (Integrity Temporary Crown and Bridge Material A2 — the global gold-standard bis-acrylic for chairside provisionals), Nexobio (Trantemp Bis-Acrylic Composite and Transcen Temp C&B LC light-cured) and GC (Pattern Resin LS for lab pattern fabrication) — covering bis-acrylic, light-cure and lab pattern formats.

Why Buy Temporary Crown Material from Dentalkart

Every temporary crown material is sourced direct from the manufacturer or authorised Indian distributor, ships in sealed cartridges or syringes with batch and expiry, and reaches 110000+ pincodes across India with COD on most SKUs. Pair temporary crown material with matched temporary cement, finishing burs and the broader prosthodontic denture base material range from one trusted catalogue serving 50,000+ dentists and dental colleges.

What are temporary crown materials used for?

Temporary crown materials are used to fabricate single-tooth provisional crowns, multi-unit provisional bridges and lab patterns. The provisional protects the prepared tooth during the 1–4 week lab fabrication of the final ceramic or PFM crown — maintaining occlusion, tooth position, gingival health and patient comfort until final cementation.

What is the difference between bis-acrylic and light-cure temporary crown material?

The difference between bis-acrylic and light-cure temporary crown material is set chemistry and workflow. Bis-acrylic composite (Dentsply Integrity, Nexobio Trantemp) sets in 2–3 minutes from a self-mixing 1:1 cartridge. Light-cure provisionals (Nexobio Transcen LC) polymerise under a curing unit in 40–60 seconds, eliminating cartridge waste and offering better anterior shade match.

Which temporary crown material is best for anterior aesthetic provisionals?

The best temporary crown material for anterior aesthetic provisionals is a light-cure resin like Nexobio Transcen LC for shade and translucency, or a high-quality bis-acrylic like Dentsply Integrity in A2 shade. Both finish to a high lustre, match adjacent tooth shade, and can be customised with composite stains and surface glaze for aesthetic try-in.

Should I use eugenol or non-eugenol cement with bis-acrylic provisionals?

You should use non-eugenol temporary cement (Tempbond NE, RelyX Temp NE) with bis-acrylic provisionals — eugenol-containing cements inhibit the polymerisation of the final resin cement bonding to dentin, weakening the long-term bond of the final crown. Non-eugenol cements release cleanly and don't interfere with adhesive workflows.

Are the temporary crown materials on Dentalkart genuine?

Yes, every temporary crown material on Dentalkart is genuine. All Dentsply Integrity, Nexobio Trantemp, Nexobio Transcen LC and GC Pattern Resin LS cartridges and packs are sourced direct from the manufacturer or authorised Indian distributor and ship in sealed primary packaging with original lot number, manufacturing date and expiry on every box.