.jpg)
.jpg)
.jpg)
.jpg)
SS Wires
Used after the initial NiTi alignment-and-levelling phase of fixed-appliance treatment, stainless-steel orthodontic archwires are high-stiffness AISI 304 or 18-8 grade wires that deliver predictable rigidity for space closure, en-masse retraction and finishing-stage torque control. Dentalkart stocks round preformed, rectangular tooth-coloured and hard-steel lab SS wires from OrthoMetric, U Ortho and Dentomech.
Recommended
Price- High to LowPrice- Low to HighStainless-Steel (SS) Orthodontic Wires
Stainless-steel orthodontic wires are the high-stiffness archwires used in the working and finishing stages of fixed-appliance orthodontic treatment, replacing the lower-force nickel-titanium alignment wires once the dentition has been levelled and aligned. Made from austenitic stainless steel — typically AISI 304 or 18-8 grade — SS archwires deliver predictable rigidity for space closure, en-masse retraction, torque expression and detailed finishing bends that flexible NiTi cannot hold. They are supplied as round preformed archwires in 10-piece packs, rectangular tooth-coloured esthetic wires for adult cases and as workshop-grade hard-steel wire in pouches for lab-bench appliance fabrication. Dentalkart stocks the OrthoMetric SS Archwires Round (10/Pk) alongside tooth-colour rectangular and hard-steel lab wires from U Ortho and Dentomech.
Types of Stainless-Steel Orthodontic Wires
Round Preformed SS Archwires
Round preformed SS archwires such as the OrthoMetric SS Archwires Round (10/Pk) come in standard 0.014", 0.016", 0.018" and 0.020" diameters supplied as bent-to-arch-form 10-piece bulk packs, used in the early working stage of fixed-appliance treatment for routine alignment continuation after NiTi finishing and as anchorage segments where round-wire force expression is sufficient.
Rectangular Tooth-Coloured SS Wires
Rectangular esthetic wires such as the U Ortho SS Tooth-Colour Rectangular Wire are coated stainless rectangular archwires (typically 0.016"x0.022", 0.017"x0.025", 0.019"x0.025") sized to engage the bracket slot for torque expression while a tooth-coloured PTFE or epoxy coating reduces the metal show-through visible at conversation distance, suiting adult-orthodontic cases.
Hard-Steel Lab & Appliance-Fabrication Wire
Hard-steel lab wire such as the Dentomech Hard Steel Orthodontic Wire (Pouches, 10g) is straight-length workshop wire supplied in 10-gram pouches for the laboratory fabrication of clasps, retainers, palatal arches, transpalatal bars, lingual arches and custom orthodontic auxiliaries that the technician bends on the model.
When Are SS Wires Used?
SS archwires are used after the initial NiTi alignment-and-levelling stage of fixed-appliance treatment — for working-stage en-masse retraction, space closure across extraction sites, anchorage segments where rigid wire expression is needed and finishing-stage torque control. Hard-steel lab wire is used during the fabrication of removable orthodontic appliances, retainers, palatal arches and transpalatal bars. Round SS wires also serve as the holding archwire during periods between active retraction phases, paired with archwire sleeves over the posterior tail.
How to Choose the Right SS Wire
For active working-stage retraction, pick round SS archwires in 0.018" or 0.020" sized to fit the bracket slot. For finishing-stage torque expression and detailed bending, choose rectangular SS archwires sized one or two thousandths smaller than the bracket slot — 0.019"x0.025" in a 0.022" slot bracket and 0.017"x0.025" in an 0.018" slot bracket. For aesthetic adult cases, choose the tooth-coloured rectangular variant. For lab fabrication of clasps, retainers and palatal arches, pick straight-length hard-steel wire in 10g or larger pouches.
Brands of SS Wires at Dentalkart
The catalogue features the OrthoMetric SS Archwires Round (10/Pk) for the standard chair-side round-wire stage, the U Ortho SS Tooth-Colour Rectangular Wire for esthetic adult-orthodontic finishing-stage cases, and Dentomech Hard Steel Orthodontic Wire Pouches (10g) for lab-bench retainer and palatal-arch fabrication — covering preformed chair-side, esthetic rectangular and workshop straight-length formats.
Why Buy SS Wires from Dentalkart
Dentalkart sources stainless-steel orthodontic wires directly from authorised manufacturers including OrthoMetric, U Ortho and Dentomech, with batch-coded packaging, cash-on-delivery, GST invoices and 110000+ pincode coverage across India. Practices can pair SS wires with the wider orthodontic wires and springs catalogue for complete archwire-stage coverage in one bulk order.
Stainless-Steel (SS) Orthodontic Wires
Stainless-steel orthodontic wires are the high-stiffness archwires used in the working and finishing stages of fixed-appliance orthodontic treatment, replacing the lower-force nickel-titanium alignment wires once the dentition has been levelled and aligned. Made from austenitic stainless steel — typically AISI 304 or 18-8 grade — SS archwires deliver predictable rigidity for space closure, en-masse retraction, torque expression and detailed finishing bends that flexible NiTi cannot hold. They are supplied as round preformed archwires in 10-piece packs, rectangular tooth-coloured esthetic wires for adult cases and as workshop-grade hard-steel wire in pouches for lab-bench appliance fabrication. Dentalkart stocks the OrthoMetric SS Archwires Round (10/Pk) alongside tooth-colour rectangular and hard-steel lab wires from U Ortho and Dentomech.
Types of Stainless-Steel Orthodontic Wires
Round Preformed SS Archwires
Round preformed SS archwires such as the OrthoMetric SS Archwires Round (10/Pk) come in standard 0.014", 0.016", 0.018" and 0.020" diameters supplied as bent-to-arch-form 10-piece bulk packs, used in the early working stage of fixed-appliance treatment for routine alignment continuation after NiTi finishing and as anchorage segments where round-wire force expression is sufficient.
Rectangular Tooth-Coloured SS Wires
Rectangular esthetic wires such as the U Ortho SS Tooth-Colour Rectangular Wire are coated stainless rectangular archwires (typically 0.016"x0.022", 0.017"x0.025", 0.019"x0.025") sized to engage the bracket slot for torque expression while a tooth-coloured PTFE or epoxy coating reduces the metal show-through visible at conversation distance, suiting adult-orthodontic cases.
Hard-Steel Lab & Appliance-Fabrication Wire
Hard-steel lab wire such as the Dentomech Hard Steel Orthodontic Wire (Pouches, 10g) is straight-length workshop wire supplied in 10-gram pouches for the laboratory fabrication of clasps, retainers, palatal arches, transpalatal bars, lingual arches and custom orthodontic auxiliaries that the technician bends on the model.
When Are SS Wires Used?
SS archwires are used after the initial NiTi alignment-and-levelling stage of fixed-appliance treatment — for working-stage en-masse retraction, space closure across extraction sites, anchorage segments where rigid wire expression is needed and finishing-stage torque control. Hard-steel lab wire is used during the fabrication of removable orthodontic appliances, retainers, palatal arches and transpalatal bars. Round SS wires also serve as the holding archwire during periods between active retraction phases, paired with archwire sleeves over the posterior tail.
How to Choose the Right SS Wire
For active working-stage retraction, pick round SS archwires in 0.018" or 0.020" sized to fit the bracket slot. For finishing-stage torque expression and detailed bending, choose rectangular SS archwires sized one or two thousandths smaller than the bracket slot — 0.019"x0.025" in a 0.022" slot bracket and 0.017"x0.025" in an 0.018" slot bracket. For aesthetic adult cases, choose the tooth-coloured rectangular variant. For lab fabrication of clasps, retainers and palatal arches, pick straight-length hard-steel wire in 10g or larger pouches.
Brands of SS Wires at Dentalkart
The catalogue features the OrthoMetric SS Archwires Round (10/Pk) for the standard chair-side round-wire stage, the U Ortho SS Tooth-Colour Rectangular Wire for esthetic adult-orthodontic finishing-stage cases, and Dentomech Hard Steel Orthodontic Wire Pouches (10g) for lab-bench retainer and palatal-arch fabrication — covering preformed chair-side, esthetic rectangular and workshop straight-length formats.
Why Buy SS Wires from Dentalkart
Dentalkart sources stainless-steel orthodontic wires directly from authorised manufacturers including OrthoMetric, U Ortho and Dentomech, with batch-coded packaging, cash-on-delivery, GST invoices and 110000+ pincode coverage across India. Practices can pair SS wires with the wider orthodontic wires and springs catalogue for complete archwire-stage coverage in one bulk order.
Frequently Asked Questions (FAQs):
What is a stainless-steel orthodontic wire?
A stainless-steel orthodontic wire is a high-stiffness archwire made from austenitic stainless steel (typically AISI 304 or 18-8 grade) used in the working and finishing stages of fixed-appliance orthodontic treatment for space closure, en-masse retraction, torque expression and detailed finishing bends that flexible nickel-titanium alignment wires cannot hold.
When should SS archwires be used instead of NiTi?
SS archwires should be used instead of NiTi once the dentition has been levelled and aligned with NiTi alignment wires and the case is ready for the working stage — space closure across extraction sites, anchorage control and finishing torque expression. NiTi delivers low continuous force suited for alignment, while SS delivers rigid predictable force suited for retraction and finishing.
What is the difference between round and rectangular SS wires?
The difference between round and rectangular SS wires is bracket-slot engagement and force expression: round SS wires (0.014"–0.020") engage only the floor of the bracket slot for tipping and rotation control, while rectangular SS wires (0.016"x0.022" and larger) fill both dimensions of the slot to express torque (root-positioning force) and angulation control needed in finishing-stage prosthodontic and aesthetic cases.
Are tooth-coloured SS wires as strong as plain SS wires?
Tooth-coloured SS wires are nearly as strong as plain SS wires — the underlying austenitic stainless steel substrate provides the same modulus and yield strength, while a thin PTFE or epoxy aesthetic coating reduces metal show-through at conversation distance. The coating may chip over weeks of brushing but the underlying wire's mechanical properties remain unchanged for active force delivery.
What is hard-steel wire used for in the orthodontic lab?
Hard-steel wire is used in the orthodontic lab for the fabrication of removable appliance components — Adams clasps, ball-end clasps, Hawley retainer labial bows, palatal arches, transpalatal bars, lingual arches and custom orthodontic auxiliaries that the technician bends to fit on a stone model. Hard-steel wire is supplied as straight-length workshop wire in pouches sized by weight.
