Tooth Jewellery
Tooth jewellery is a small decorative crystal or gem bonded to the front of a tooth for cosmetic sparkle. It is fixed chairside in a few minutes using dental adhesive, with no drilling into the tooth. Because it only sits on the enamel surface, it can be removed later without lasting damage, making it a reversible accessory.
Recommended
Price- High to LowPrice- Low to HighTooth Jewellery
Not every smile upgrade needs a drill. Tooth jewellery adds a small point of sparkle to a tooth without touching its structure — a tiny crystal simply bonded to the enamel surface. The application is quick and painless. The tooth is cleaned and prepared, the crystal is set with adhesive, and it is cured in place, all in one short visit. Because nothing is cut away, it is fully reversible. The crystal is bonded much like a small spot of composite, and lifts off cleanly when the patient wants it gone.
How it goes on
Fitting a crystal is a short, non-invasive routine:
- Clean and isolate — the tooth surface is polished and kept dry so the bond holds.
- Prepare the spot — the enamel is lightly etched and primed for adhesion, no drilling.
- Bond and cure — the crystal is placed with adhesive and light-cured to lock it on.
The whole process takes minutes and needs no anaesthetic.
What you get in a set
Tooth jewellery is sold as a small set of crystals:
- Several pieces — a set gives a choice of stones and spares for future applications.
- Ready to bond — designed to fix with standard dental adhesive from the bonds and etchants range.
- Reusable technique — the same etch-and-bond method used for other enamel-surface work.
One set covers several patients or repeat placements.
Applying and removing
A few practical points:
- Placement — usually on an upper front or canine tooth where it shows when smiling.
- Bonding — etch, prime, and light-cure for a secure hold that still comes off cleanly.
- Removal — polished off with a polishing bur and finishing disc, leaving the enamel intact.
- Care — the patient brushes normally; the crystal simply stays put until removed.
A well-bonded crystal lasts months and comes off whenever the patient decides.
Tooth Jewellery
Not every smile upgrade needs a drill. Tooth jewellery adds a small point of sparkle to a tooth without touching its structure — a tiny crystal simply bonded to the enamel surface. The application is quick and painless. The tooth is cleaned and prepared, the crystal is set with adhesive, and it is cured in place, all in one short visit. Because nothing is cut away, it is fully reversible. The crystal is bonded much like a small spot of composite, and lifts off cleanly when the patient wants it gone.
How it goes on
Fitting a crystal is a short, non-invasive routine:
- Clean and isolate — the tooth surface is polished and kept dry so the bond holds.
- Prepare the spot — the enamel is lightly etched and primed for adhesion, no drilling.
- Bond and cure — the crystal is placed with adhesive and light-cured to lock it on.
The whole process takes minutes and needs no anaesthetic.
What you get in a set
Tooth jewellery is sold as a small set of crystals:
- Several pieces — a set gives a choice of stones and spares for future applications.
- Ready to bond — designed to fix with standard dental adhesive from the bonds and etchants range.
- Reusable technique — the same etch-and-bond method used for other enamel-surface work.
One set covers several patients or repeat placements.
Applying and removing
A few practical points:
- Placement — usually on an upper front or canine tooth where it shows when smiling.
- Bonding — etch, prime, and light-cure for a secure hold that still comes off cleanly.
- Removal — polished off with a polishing bur and finishing disc, leaving the enamel intact.
- Care — the patient brushes normally; the crystal simply stays put until removed.
A well-bonded crystal lasts months and comes off whenever the patient decides.
Frequently Asked Questions (FAQs):
What is tooth jewellery?
It is a decorative gem or crystal fixed to the front of a tooth purely for looks. It is bonded to the enamel with dental adhesive during a short chairside visit, with no drilling or injection. Because it sits only on the surface, it adds sparkle without altering the tooth and can be taken off again later.
Does applying tooth jewellery damage the tooth?
No. The crystal is bonded to the outside of the enamel, not cut into the tooth, so no healthy structure is removed. The surface is only lightly etched to help the adhesive grip, the same gentle step used for other bonded work. When the jewel is removed, the enamel is polished clean and left undamaged.
How is tooth jewellery applied?
The tooth is cleaned, isolated, and kept dry. The spot is lightly etched and primed so the adhesive bonds well, then the crystal is placed and light-cured to set it firmly. The whole procedure takes only a few minutes, needs no anaesthetic, and the patient can eat and speak normally straight afterwards.
How long does tooth jewellery last?
A well-bonded crystal typically stays in place for several months, and often longer with good care. It lasts as long as the bond holds, so proper isolation and curing at placement matter. If it loosens or the patient wants a change, it can be re-bonded or removed easily. It is meant to be a semi-permanent, reversible accessory.
Can tooth jewellery be removed?
Yes, easily and safely. Because it is only bonded to the enamel surface, a clinician polishes it off with a bur and finishing disc, then smooths the spot. No drilling into the tooth is needed and the enamel is left intact. This reversibility is a key appeal — the patient can have it removed or replaced whenever they like.
